B & K Evaporative Cooler Valve, Specifications: 3/4 in FHT Inlet, Brass

The Frost King air conditioner support bracket is a must-have item when installing a window air conditioning unit. The Frost King Air conditioner bracket safely supports AC units.

3/4 in FIP inlet x 3/4 in hose connection with tapped 1/8 in I.P, straight through side wall.

3/4 in female hose connection inlet x 3/4 in hose connection with tapped 1/8 in I.P, straight through side wall.

Anderson Metals Cooler Nipple, Brass, Suitable for: Evaporative Cooler Purge Systems

Manufactured from heavy gauge steel with a durable baked-on epoxy finish. Stainless steel hardware to resists weather damage.

Manufactured from heavy gauge steel with a durable baked-on epoxy finish. Stainless steel hardware to resists weather damage.

6 position rotary wall switch for two-speed evaporative coolers. Kits include plastic plate, mounting screws and wiring diagram. UL recognized component rotary switch. Rated for 1/3 to 3/4 hp motors.

Set of 2 for standard 2-1/2 in resilient motor mounting rings.

1/4 in CC x 1/4 in CC straight in line water shut-off valve. Includes poly tube adapters for 1/4 in poly tube.

High efficiency, high-temperature insulation system. Capable of withstanding temperatures over 300 deg F. Reduces motor failures due to heat aging. Premium moisture-resistant insulation system. Styrenated epoxy coating on rotor prevents rust build-up and extends the life of the motor. 115 V, all copper windings, no base, 56Z frame. Auto-reset thermal overload protection. Great starting switch features. Heavy-duty bronze bearing. Mechanically and electrically approved for evaporative cooler applications. Label and instructions in English and Spanish. UL approved construction.

Variable pulleys must be opened 2-1/2 to 5 full turns, depending on air resistance or motor will overheat. If motor cycles, open variable pulley until motor stops cycling. If cycling persists when pulley is fully opened, you must use the next size smaller pulley. Always use pulley size recommended by cooler manufacturer.

Brass body casting, arm and stem. Stainless steel seat, polypropylene float. Plunger rotates to discourage alkali deposits.

Everything needed to install a pump on a new or existing evaporative cooler. Contains: 1/4 in float valve, water distributor adapter, 1/2 in 5 ft vinyl pump hose, pump hose restrictor, round formed basket, 2 hose ring clamps, plastic drain and overflow pipe and installation instructions.

Resistant to UV degradation, use to run water to coolers, not for potable water. Do not use indoors or in attic.

Connects pump hose to water distributor head.

The automatic Power-Clean? mineral and scale elimination system will save money and conserve water by automatically flushing your cooler clean every 8 hr of existing cooler pump operation. The new test button feature on the Power-Clean? system will activate the 7 min purge cycle. Once this cycle is complete, the 8 hr purge timer will reset. Power-Clean? connects directly to the existing cooler pump (recirculating pump). Once installed in the pan of the cooler, Power-Clean? automatically cycles every 8 hr of cooler pump operation to empty the water and replenish the cooler with fresh water. The cooler capability is never interrupted. Replacing the cooler water on a regular basis is beneficial by removing mineral scale build-up and bacterial growth. Power-Clean? eliminates the need for a bleed-off and the use of cleaners or harsh chemical additives.

Standard compression sleeve for 1/4 in OD copper tube.

Threaded nylon overflow pipe has 1/2 in MPT standpipe with hex head top, 1/2 in thread length, 3 in smooth length. Black color.

300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.

Prevents sagging and movement. Replacement for Champion Coolers.

High efficiency, high-temperature insulation system. Capable of withstanding temperatures over 300 deg F. Reduces motor failures due to heat aging. Premium moisture-resistant insulation system. Styrenated epoxy coating on rotor prevents rust build-up and extends the life of the motor. 115 V, all copper windings, no base, 56Z frame. Auto-reset thermal overload protection. Great starting switch features. Heavy-duty bronze bearing. Mechanically and electrically approved for evaporative cooler applications. Label and instructions in English and Spanish. UL approved construction.

1/4 in CC x 1/8 MPT straight water shut-off valve. Includes poly tube adapter.

Includes slip in, non-threaded overflow pipe, washer, poly drain with 3/4 in male garden hose threads.

Molded 3 prong plug and extra-long grounded cord fits Champion cooler mounting bracket. Built-in supplementary pump screen, flame-retardant motor housing and auto-reset thermal overload protection. Corrosion-resistant shaft. Permalube bearings. Built-in barbed elbow. Removable base plate for ease of cleaning. Operates in water reservoirs of 1/2 to 4 in, 120 VAC, 60 Hz, UL classified.

Has heavy-duty bearings, pumps more water, is more efficient than the offset design and has longer life/warranty period.

Controls scale build-up and corrosion in coolers, special formula holds minerals in suspension by raising the solubility level of the water. Reduces mineral build-up on pads must be used with a bleed off kit or PowerClean? purge pump to flush suspended minerals.

Sill cock garden hose thread fits directly onto existing outdoor faucet. Attach angle needle valve or male compression coupling to side tapped 1/8 in FIP to connect to cooler.

Molded motor plug cords with 115 V configuration will fit all 115 V motor receptacle cords & pigtails. 230 V molded motor plug cords have 230 V prong configuration.

Formed basket, fits all pumps. 8 in L x 6 in W x 3-1/2 in H.