Standard door strike with adjustable tab. Replaces most residential interior and exterior strikes. Fits all standard doorways. Includes 1 strike and 2 installation screws.

Standard latch strike with 1-5/8 in hole centers. Adjustable tab. Replaces most residential interior and exterior strikes. 1-7/16 in x 2-1/4 in.

Standard latch strike with 1-5/8 in hole centers. Adjustable tab. Replaces most residential interior and exterior strikes. 1-7/16 in x 2-1/4 in.

Standard T-strike, used on wood or metal jambs with most grade 2 locksets. Includes one strike with two #8 x 1 in Phillips flat head combination screws.

Standard latch strike with 1-5/8 in hole centers. Adjustable tab. Replaces most residential interior and exterior strikes. 1-7/16 in x 2-1/4 in.

Standard door strike with adjustable tab. Replaces most residential interior and exterior strikes. Fits all standard doorways. Includes 1 strike and 2 installation screws.

Standard latch strike with 1-5/8 in hole centers. Adjustable tab. Replaces most residential interior and exterior strikes. 1-7/16 in x 2-1/4 in.

Strengthens or repairs wood jambs. Improves security with 3 in long screws attaching to wall stud.

Commercial door strike. Adjustable up to 3/8 in. Fits standard ASA cutout. 4-7/8 in x 1-1/4 in. Includes 1 strike and 1 set of installation screws.

Commercial door strike. Fits standard ASA cutout. 4-7/8 in x 1-1/4 in. Includes 1 strike and 1 set of installation screws.

1-1/4 in W x 3-5/8 in L high security deadbolt strike. Includes 1 strike, two 1 in screws and two 3 in long security screws to anchor into the door frame stud.

1/8 in thick heavy-gauge steel base allows 3 in screws to anchor to wall stud. Finished cover matches common exterior trim.

Covers marred doors and allow conversion of 2-3/8 to 2-3/4 in backset or 2-3/4 to 2-3/8 in. Inside diameter of 2-1/8 in, outside diameter of 3-1/2 in. Includes 2 plated covers.

Supplied with 3 in long wood screws to allow additional security by fastening thru jamb into 2 x 4 outer door framing. Replaces standard strikes and provides improved security.

Standard commercial 4-7/8 in strike. Used on wood or metal jambs with most grade 1 locksets. Fits standard ASA cutout. Includes 1 strike with two #12-24 x 1 in Phillips flat head combination screws.

1/8 in thick heavy-gauge steel base allows 3 in screws to anchor to wall stud. Finished cover matches common exterior trim.

Plated steel strike is supplied with 3 in long wood screws to allow additional security, by fastening thru jamb into 2 x 4 outer door framing. 1-5/8 in W x 11 in H. Spacing between deadbolt opening and latch opening of 3-5/8 in.

Plated steel strike is supplied with 3 in long wood screws to allow additional security, by fastening thru jamb into 2 x 4 outer door framing. 1-5/8 in W x 11 in H. Spacing between deadbolt opening and latch opening of 3-5/8 in.

For both in swinging and out swinging doors. Protects against pry bar and other forms of forced entry. Inswing application will require some mortising to jamb.

Fits 5-1/2 in and 6 in hole spacing's on dead latch and deadbolt. Uses six 3 in screws that install on the vertical side of the strike closest to the stop molding. These 3 in screws allow for a strong hold as they drive into the jack stud to help prevent kick-ins.

1/8 in thick heavy-gauge steel base allows 3 in screws to anchor to wall stud. Finished cover matches common exterior trim.