Appearance-grade, southern yellow pine. MCA treatment, above ground contact.

No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.

No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.

No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.

No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.

No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.

No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.

No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.

Used under Sun-n-Rain panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.

Woodtite 1 in screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2 in screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application.

Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.

Used under Palruf? or Suntop panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.

ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 4 ft Length

Use under Palram's corrugated panels to close off vertical edges for a finished look.

Appearance-grade, white pine. MCA treatment, above ground contact.

No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.

Appearance-grade, white pine. MCA treatment, above ground contact. Accommodates 4 x 4 in post.

Appearance-grade, white pine. MCA treatment, above ground contact.

Fasade inside corner trim pieces allow you to finish the corners of panels in a matching finish. The trims are easy to install and add a professional touch to any project. Simply cut with scissors or utility knife.

Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.

Protects post from nature's elements. Has 3-5/8 in x 3-5/8 in opening size, for posts measuring 3-1/2 in x 3-1/2 in.

Appearance-grade, white pine. MCA treatment, above ground contact.

Appearance-grade, white pine. MCA treatment, above ground contact.

Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.

No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.

Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.

Designed to work with stair angles between 30 to 35 deg and works with both wood and composite materials. Comes with stainless steel screws and will install ten classic balusters. ACQ and CA compliant.

Appearance-grade, white pine. MCA treatment, above ground contact.

Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Applies to wood, plywood particle board, hardboard, metal and more. Prefinished and colorfast. Heat and stain-resistant, washable and static-free. Flexible and durable (not recommended for surface subject to sharp tools). Trims with edge trimmer or utility knife. Cut edge 1/2 in longer than surface to be covered with preheat (400 deg) iron, press length of edging till glue has melted while still hot, press edging down firmly with wood block or re-apply. Carded.

Appearance-grade, white pine. MCA treatment, above ground contact.