Loctite? epoxy quick set is a two-part adhesive consisting of an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond in 5 min for most projects. Available in a convenient dual syringe which delivers equal parts of both components every time. Loctite? Epoxy Quick Set can be used as an adhesive for a wide range of materials or as a versatile filler for gap filling, surface repairs and laminating. Loctite? Epoxy quick set does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching. It can be sanded and drilled.

A two-part, rapid curing, clear, general-purpose epoxy. Better on more rigid materials. Useful for repair of autos, bikes, boats, golf clubs, skis and more. May also be used as a metal filler and to restore rotten wood. Resists water, gasoline, diesel, kerosene and most other chemicals.

Versatile, easy-to-use, general-purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in 5 mins, no clamping needed. Clear appearance, fills gaps and will not shrink. Resistant to water and solvents. Self-mixing dual syringe blends the adhesive and filler as it dispenses, eliminating the need for manual mixing.

Loctite? epoxy metal or concrete is a two-part system consisting of an epoxy resin and a hardener. The convenient syringe dispenses equal amounts of each component every time. When mixed in equal volumes, resin and hardener react to produce a tough, rigid, high strength bond in 5 to 12 mins. It is used as an adhesive for repairing, filling and re-building all metal and concrete surfaces. Loctite? epoxy metal or concrete does not conduct electricity which is ideal for sealing electrical components. It cures to a metallic gray finish and can be easily sanded or machined. It does not shrink and is resistant to water and most common solvents.

PC-11? thrives in wet environments. It is resistant to water whether it is fresh or salt. Thick consistency like PC-7? and long open-time (30 mins). Work horizontal or vertical, indoor or outdoor. Wet, dry or under water. Whether you are working on an area where you just can?t remove water and moisture or you want the white color for your repair, PC-11? is your choice. Choose PC-11? for ceramic repairs, pools and spas, fiberglass boats, tubs and sinks, stock tanks and thousands of other repairs. It has excellent adhesive properties bonding metals, fiberglass, wood, tile and some plastics such as ABS and rigid PVC. Ample open-time allows tooling or positioning in order to tackle larger and challenging jobs. When mixed, the epoxy, part-A (white) and the hardener part-B (lt. blue) react to form a bond of tremendous strength and flexibility. The PC-11? formulation is slow-curing, but slow can be a good thing especially for large tasks.

A two-part, high strength, rapid curing gel formula epoxy. Ideal for vertical and overhead applications. Will not drip or sag. Great for filling gaps. Complete with a blue dye indicator, the blue dye disappears when the epoxy is thoroughly mixed.

PC-CLEAR? epoxy is a medium viscosity liquid epoxy system with greater clarity than other epoxies. This product is excellent for repairs and projects that must be less visible such as art objects or collectibles. PC-CLEAR? epoxy is fast-curing but allows ample time to apply and position the repair. After curing the epoxy does not become brittle, instead cured PC- Clear? forms a tough resilient bond. PC-CLEAR? can be used on more than just cosmetically critical repairs and in addition it can be used for automotive, construction and facility repairs. Use PC-CLEAR? when you are concerned about appearance of your repair and a liquid epoxy is what you are looking for.

Magnum steel is a fast-curing, two-part epoxy putty stick that permanently repairs leaks, holes and cracks. When fully cured, it can be drilled, filed, sanded and painted. Use it to repair pipes, tanks, radiators, couplings and more.

PC-SUPEREPOXY? is a non-drip translucent paste epoxy suitable for conventional or static mixing. It has unlimited uses in bonding, assembling, filling and sealing most materials. Unlike conventional liquid epoxies, PC-SUPEREPOXY? can be applied via a static mix nozzle vertically and overhead. It cures quickly at room temperature to form a resilient, non-conductive bond or seal that resists most chemicals, fresh and salt water, gasoline and fuel oil. Works great bonding steel to wood, fiberglass, aluminum, concrete, brick, glass, block, ceramics, hard plastics and much more. PC-SUPEREPOXY? is the toughest, highest strength epoxy we manufacture.

PlasticWeld? is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. After mixing, it forms a polymer compound that can be molded or used to buildup and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. PlasticWeld? has a 20 to 25 mins work life, functional cure occurs in 2 to 3 hrs. PlasticWeld? cures to an off-white color, is rated at a tensile strength of 350 psi.

PlasticWeld? is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld? will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld? sets in 5 mins at room temperature and is fully cured in 1 hr. Using a 1:1 mixing ratio, PlasticWeld? combines to a tensile strength of 3200 psi and cures to an off-white color.

Loctite? epoxy instant mix 5 - min is a two-part adhesive consisting of an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond, which starts to set in 5 min and reaches handling strength in 1 hr. The static mix nozzle delivers a uniform mixture of resin and hardener every time. It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating. Loctite? Epoxy Instant Mix 5 min does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.

PC-FAHRENHEIT? putty epoxy is the choice for temperatures up to 500 deg F. It is supplied as a pre-measured stick that you mix with fingers. Fast-curing (60 mins). Best for steam heat applications. A toolbox must. Great on copper and iron.

PC-METAL? putty epoxy replaces metal. Mix with fingers and apply. Quickly PC-METAL? cures to re-attach metal (30 mins). Cures hard, fast, non-conductive. Contains metal, sticks to metals such as cast iron, zinc, aluminum, stainless steel, steel and copper.

PC-LUMBER? epoxy putty is pre-measured and mixed by hand. It is used as a filler where a small amount will solve the problem. Within 60 mins it is cured and ready. The putty can be easily formed and shaped.

PC-MARINE? epoxy putty stick is a specially formulated epoxy putty suitable for wet or underwater applications. Incredibly it has an extended open time (20 to 30 mins) but cures hard within 60 mins for a fast return to service and emergency repairs. It sticks great to metals, fiberglass, tile, wood and some plastics such as ABS and rigid PVC.

PC-CRETE? epoxy is a hand-mixable, fast-setting epoxy putty that quickly repairs concrete and masonry. After mixing, it forms a concrete repair polymer that cures to a concrete-like color and texture. The mixture readily sticks to concrete and masonry surfaces and is easily shaped. It will stick to ceramics, glass, metals and some plastics. It cures within 60 mins. Each stick contains pre-measured portions of activator and base, no measuring or mixing tools are necessary.

Loctite? repair putty multi-purpose is a two-part adhesive consisting of an epoxy resin putty and a hardener putty which are mixed by kneading. They react to produce a hard, tough, permanent and waterproof bond on a wide range of materials. Loctite? repair putty multi-purpose does not shrink and is resistant to most common solvents. It can bond to damp surfaces and cure under water. Loctite epoxy putty can be sanded, drilled and painted.

WaterWeld? will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks, setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld? has a set time of 15 to 25 mins and sets hard in 1 hr. WaterWeld? cures to an off-white color, is rated at a tensile strength of 900 psi and will withstand temperatures up to 300 deg F.