For wire tying, bundling and other fastening uses. Meets flammability classification UL94V-2.

For wire tying, bundling and other fastening uses. Meets flammability classification UL94V-2.

Gardner Bender wire connectors are engineered to exceed the expectations of professional electricians. Ideal for commercial or residential applications GB wire connectors offer world-class quality, performance and application versatility. Our connectors provide maximum application flexibility by offering contractors and Do-It-Yourselfers myriad packaging options, ergonomic designs and wire ranges.

Attach large diameter cable to wood surfaces with the Gardner Bender 1-3/8 in x 13/16 in steel service entrance cable staples for #6/3 SEU cable 10 pack. These staples feature offset legs to prevent wood splitting and a diamond head for easy hammering.

Calterm offers a broad selection of professional-grade adhesive tape, including different grades of electric tapes, sealant tapes for a complete assortment and various colors to support your application. Adhesive tape acts as a superior solution for sealing and insulating splices, terminals and electrical connections in indoor and outdoor applications. The assortments of electrical tape designed for general-purpose electrical applications and made from low-lead PVC material.

These low-voltage coaxial cable staples feature UV-resistant polyethylene saddles able to withstand both indoor and outdoor applications. Zinc-plated nails resist rust and corrosion and feature a sharp tip for easy starting and to reduce cracking and splintering of wood during installation. One nail per staple facilitates a quick hammer installation. Designed to secure cable of 1/4 in Dia or less including CAT6 or RG type cables CAT 6, RG-6/U, RG-62A, RG-62/U to wood.

The 1/4 in black polyethylene clip-on coaxial masonry staples 25-pack feature UV-resistant polyethylene saddles that are suitable for indoor and outdoor applications. These staples are ideal for securing RG-59 and RG-6 coaxial cables into cement block and masonry and include hardened nails that can penetrate cement block, mortar or plaster surfaces.

100 18 LB NAT NYLON

For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified.

For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified.

Gardner Bender wire connectors are engineered to exceed the expectations of professional electricians. Ideal for commercial or residential applications GB wire connectors offer world class quality, performance and application versatility. Our connectors provide maximum application flexibility by offering contractors and do it yourselfers myriad packaging options, ergonomic designs and wire ranges. They are designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements.

The Gardner Bender 3/16 in white polyethylene low-volt staples secure bell, speaker, thermostat and telephone wire. These staples feature UV-resistant polyethylene saddles for excellent resistance to rust, rot and deterioration. The zinc-plated nails resist rust and corrosion, making this staple ideal for both indoor and outdoor applications and with only one nail per staple installation is quick and easy.

WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.

WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.

WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.

WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.

WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.

GB's WingGard? twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force.

GB's WingGard? twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force.

These multi-range hex head connectors cover 95% of everyday applications making them the simple choice for all of your wire connection needs. Don't worry about using a hex tool to install - you can't over-torque this connector because it's patented hex-head design strips out at UL torque saving the wires and your fingers. Inside the connector a zinc-plated square wire spring ensures a secure connection that resists corrosion. The thermoplastic shell is designed for long-lasting strength and resists chemicals while the deep skirt supports smooth wire entry and coverage of stripped wires.

GB's WingGard? twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force.

The 3/16 in black polyethylene low-volt staples 25-pack feature UV-resistant polyethylene saddles for excellent resistance to rust, rot and deterioration for indoor and outdoor use and are suitable for securing speaker, telephone, bell and other low-volt wires.

PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil. thick. UL listed and CSA Certified.

For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified.

Specifically designed for making positive ground connections with a hole in the tip of the connector to feed ground wire through. GreenGard connectors feature the same live-action as GB WingGard connectors with knurled wings for a sure grip and greater twisting leverage/torque. In addition GreenGard connectors offer added plating protection for corrosion resistance in grounding applications. Inside the connector a zinc-plated square wire spring ensures a secure connection that resists corrosion. The thermoplastic shell is designed for long-lasting strength and resists chemicals while the deep skirt supports smooth wire entry and coverage of stripped wires.

Insulated metal staples secure a large variety of cable types including NM, BX, MC, AC and UF cables. These staples offer a durable polyethylene insulating sheath to prevent arc faults if the staple is over-driven through a cable jacket. Strong steel constructed staples offer sharp, burr-free tips which easily bite into wood upon hammering and deter wood from splitting. Do not drive the staple beyond the insulation stops to achieve a clean insertion and secure wiring without damage to cable or wood. 1/2 in staples secure 2 conductor NO 12 and NO 14 non-metallic BX, MC, AC and UF cable.

The Gardner Bender 9/16 in graphite metal staples 18-pack feature durable metal construction with a graphite metallic finish. These staples are ideal for securing non-metallic cable and can be drive in with a hammer. The recessed heads help protect your cable and the sharp tips help the staples start easily.

For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified.

For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified.

General-purpose electrical insulating tape, good dielectric strength. 7 mils thick. UL listed and CSA certified.