Twin probe circuit tester tests AC/DC voltage from 80 to 250 VAC/VDC. The neon indicator glows when voltage is present and brightens as voltage increases. Offers insulated housing and test leads for safety. Built-in pocket clip for added convenience. Tests DC motors, switches and outlets.

For testing electric circuits from 90 to 600 volt. Detects presence of power on either AC or DC circuits. Identifies circuit conductors.

This low voltage tester tests for AC/DC Voltage from 5 to 50 VAC/VDC, 50 to 60 Hz. The indicator glows when voltage is present and brightens as voltage increases. Applications include testing low volt outdoor lighting, low volt control panels, doorbells, alarm systems and automotive 12 VDC and 36 VDC.

Used to test DC voltage in automotive applications. Features 3 ft test lead with alligator clamp and 360 deg bright visual indicator. Durable ABS housing with pocket clip. Checks fuses in junction block, automotive circuits for voltage. Back probe connectors and sockets. No batteries required.

The continuity tester is very easy-to-use and is used to test for breaks in non-energized wires or cords. Continuity has a bright 360 deg visual indicator located near the tip along with a flexible lead for ease of use.

Heavy-duty 3-way voltage tester tests AC/DC voltage at 120, 240 and 277 V. Individual indicators for each voltage range assures reliability. 24 in test lead is long enough for convenient testing. Unit is both durable and compact. Testing applications include outlets, panels, light fixtures, switches, circuit breakers and more.

Safety is the number one priority on any jobsite. Gardner Bender's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal, the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal. The condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.

This handy standard receptacle tester features a compact, comfortable, contoured design with neon indicators that display positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle (110 to 125 VAC circuits) and a succession of yellow and red lights provides indication of circuit status or specifies wiring errors. Lamps reveal 5 common wiring errors including open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse, as well as correct wiring. Easy to read status chart displayed on both top and bottom of the tester for multiple position viewing. Designed for use on standard outlets and extension cords.

Tests ground fault receptacles by overloading circuit and tripping GFCI. Tests for ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring.

Testing for voltage to any electrical project is important for your safety. This compact multi-purpose unit makes it easy with a combination voltage probe and continuity tester built into a single unit with a convenient screwdriver tip designed for quick faceplate removal. Its compact size fits easily into a pocket or tool box for retrieval as needed. Use to test outlets, fuses, switches, electronics, extension cords, light fixtures and low voltage lighting circuits.

A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The Gardner Bender GVD-3504 Circuit Alert non-contact voltage tester features both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of AC voltage from 50 to 600 V. Use to locate breaks in wires and voltage at outlets, circuit breaker panels, light fixtures, switches and motors. Quickly locates the hot terminals in receptacles. Fully insulated probe tip eliminates the risk of contacting live electrical wires. Built-in patented safe test feature ensures tester and batteries are working properly. The unit includes a pocket-clip for secure portability.

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Pocket sized analog tester. Tests voltage, DC voltage, DC current, resistance, continuity and batteries.

When you're ready to add a multimeter to your toolbox this unit is a great place to start. This tester is designed to work on most household appliances and is equipped with an easy to read 3-1/2 in digital display and three testing functions - AC voltage to 500 V, DC voltage to 600 V and resistance to 2 mOhm. The 11 position manual ranging smooth rotary style achieves precise readings and the low battery indicator ensures an accurate read-out. Durable housing is drop-resistant to 3 ft and crush-rated to 150 lb. Tester is rated Cat III 600 V. Unit comes pre-packaged with secure-fitting 26 in test leads and operating instructions.

Circuit Alert pliers combine common electrician needs with the Gardner? Bender overmolded, comfort grip.

Circuit Alert pliers combine common electrician needs with the Gardner Bender over-molded, comfort grip.

This patented line of tools with snap-in sensor detects AC voltage without contacting live wires.

Sperry makes the job of locating electrical circuits (AC circuits of 110 to 125 V) quick and easy. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time using trial and error until you hit the right one. This circuit breaker finder features a sending unit which you plug into a receptacle in the room where you want to work and a receiving unit which you use to test the breakers to correctly identify the right breaker every time. The receiver features both a visual flashing light and an audible beeping to alert you when the correct breaker is identified. The package includes a user manual and a 9 V battery required for the receiver unit.

The Gardner Bender network cable tester for coax, Cat3 through Cat6 Ethernet tests for opens, shorts, miswires, reversals and shield continuity. The easy-to-read LEDs of this cable tester pinpoint the exact error of the cable being tested.

When you contemplate adding a multimeter to your toolbox this Gardner Bender auto-ranging unit makes the decision easy. Equipped with an easy to read 3-1/2 in backlit LCD digital display and magnetic holding strap making this tester ideal for automotive, appliance, circuit breaker and other hands-free applications. In addition the multimeter features rubber housing to promote a steadfast comfortable grip while wrap-around lead holders keep leads at the ready. Snap-in probes spaced to fit a standard outlet provide quick and easy testing with one hand. Engineered with seven testing functions - AC voltage to 500 V, DC voltage to 600 V, resistance to 20 mOhm, diode, continuity (includes audible indication), temperature probe (-40 to 1832 deg F) and battery testing for 1.5 V batteries. The seven-position auto-ranging smooth rotary style achieves precise readings and the low battery indicator with auto-off function ensures an accurate read-out. Durable housing with a rubber boot is drop-resistant to 6 ft and crush-rated to 150 lb. Tight and secure input jacks keep the included 26 in test leads fixed firmly in place during testing. Unit comes pre-packaged with leads, a magnetic attachment strap for hands-free operation and user manual. Tester is rated Cat III 600 V.

Quickly and conveniently check outlets, fuses, wires, plugs, motors, electronic circuits and more with Sperry's new pocket digital multimeter. The Sperry pocket digital multimeter offers 7 testing functions including AC/DC voltage up to 600 V, resistance, frequency, continuity, duty cycle and diode testing over 21 ranges with auto-ranging capability. Designed for someone seeking a convenient and simple yet accurate and efficient multimeter. This compact unit features overload protection on all ranges and both a low battery indicator and an auto-power off function to improve battery efficiency.

One-of-a-kind meter gives instant, accurate readout of amps or watts used by common cord-connected household appliances and lights.

The Gardner Bender GCM-500 clamp-on analog multimeter is a 4 function, 8 range manual-ranging tester engineered to measure AC Current (600 A), AC/DC Voltage (600/60 V) and resistance (1000 Ohm). Similar to standard analog multimeters, clamp meters offer a large range of functions with the additional unique ability to measure current without having to contact live conductors. This tester includes a 1-1/2 in jaw size with the lockjaw feature that prevents misuse by only allowing the jaws to open in the amps mode. Unit also offers an 8 position smooth rotary dial, 0 Ohm adjustment dial and a data hold switch to maintain the reading on the easy to read display. Unit meets Cetus agency approvals, is fuse and diode protected and includes a calibration screw. Tester provides a 3 ft drop and 150 lb crush rating as well as a 1 year warranty and includes both test leads and operating instructions in the package. Gardner bender offers over 50 years of experience making professional electrical testers, tools and supplies so you can count on us to provide quality performing products for professional and DIY use.

The Gardner Bender digital clamp meter measures current up to 600 A AC, voltage to 600 VAC/VDC and resistance to 1 mOhm. This versatile tool features an easy to read LCD display and data-hold functionality for easy retrieval. It is durably designed with a 6 ft drop and 150 lb crush rating.