0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A.

Harvey Thread Seal Tape, PTFE, Red/White, 520 in L, 1/2 in W, 0.003 in Thick, Density: 0.4 g/cc, Temperature Rating: -400 to 500 deg F, Elongation: 50 %

The plumber tape is adhesive tape that is usable on a variety of plumbing fixtures. It fixes leaks and loose pipes for smoother water flow.

Plumb Pak Thread Seal Tape, PTFE, 520 in L, 1/2 in W

Harvey Thread Seal Tape, PTFE, White, 520 in L, 3/4 in W, 0.003 in Thick, Density: 0.4 +/- 0.1 g/cc, Temperature Rating: -400 to 500 deg F, Elongation: 50 %

0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A.

Extra heavy, full density tape especially for gas lines. Recommended leak-proof sealant for lines carrying natural gas, propane, butane, water, oil and chemical installations. Use on plastic, stainless steel, aluminum and all metals, ceramic, synthetic rubber, monel and carbon pipe, conduit, valves, bolts, anything with a thread. Permits easy disassembly. Pressure rating of 10,000 psi 0.0035 mil thick, tolerates up to -450 to 500 deg F. Meets Federal Specification T-27730A. UL listed.

Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 to 1.5 g/cu-cm and 4 mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box.

Provides fast positive seal for water lines, sewage lines and sprinkler systems. Effective on metal or plastic threads. 3 mil thick and density of 1.35 to 1.5 g/cu-cm. Complies with MIL-T-27730A and UL 31 RO. Spool- display carton.

0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A.

For use on plumbing threads to prevent leaking.

For use on plumbing threads to prevent leaking.

0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A.

0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.