Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Bubbler flow rates are adjustable from 0 to 13 gph at 30 psi for stream type and from 0 to 24 gph at 30 psi for the fan spray. These features allow the higher flow rates required when watering large and small plants on the same circuit.

For use with 5/8 in (0.690 to 0.700 in OD) hose only. Compression inlet/outlet shut-off for 5/8 in hose. For water pressure up to 60 psi.

Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.

Double-ended, double-duty plugs seal either large or small holes in 1/2 in, 5/8 in or 0.71 in hose.

Used to shut-off the end of 1/4 in tubing. Removes easily.

3/4 in hose thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. For use with 1/2 in (0.62 in to 0.630 in OD) hose only. Green compression ring.

3/4 in pipe thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to 3/4 in male pipe thread. Washer included. For use with 1/2 in (0.62 to 0.63 in OD) hose only. Green compression ring.

4 in plastic stakes hold 1/4 in tubing in place next to plants.

Double barbed design, allows use with higher pressures, join or connect two lengths of line. 1/4 in connector used with 1/4 in (0.160 to 0.197 in ID) tube only. Double barb design allows water pressures up to 50 psi.

Closes ends of 1/2 in (0.620 to 0.630 in OD) poly hose when frequent flushing is necessary. Green compression ring. Made from ABS. For water pressure up to 60 psi.

Join or connect two lengths hose. Made from ABS. For water pressure up to 60 psi.

Designed for comfortable use, punches holes in 1/2 in, 5/8 in or 0.710 in hose to insert PC drippers or 1/4 in fittings. Handle has socket for installing and removing Micro spray jets. Card includes hole plugs.

For water pressure up to 60 psi. Ends are color-coded for easy size identification.

Heavy-duty 13 in stake with adjustable 8 in rigid riser for use with low-flow sprinklers and spray heads with 10-32 NFT inlets. Just screw the sprinkler/sprayer into the rigid riser moving it up or down to water above plants. Constructed of high-density polyethylene and polypropylene.

Compression tees made from ABS. For water pressure up to 60 psi.

Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Adjustable bubbler rotates easily to preferred water flow, from full coverage for shrubs and large potted trees to shut-off position.

Uniformly sprays water over a semicircular area with an adjustable radius of up to 7 ft. Sprayer inlet size of 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.

Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray with spray diameter up to 13 ft at 30 psi. Bubbler flow rates are adjustable from 0 - 13 gph at 30 psi for stream type and from 0 - 24 gph at 30 psi for the fan spray. These features allow the higher flow rates required when watering large and small plants on the same circuit.

3/4 in hose female thread inlet; 3/4 in male hose thread outlet. Includes filter washer. Available in 3/4 in BSP threads. Atmospheric vacuum breaker made of high impact ABS. Keeps impure water from syphoning back into water supply. Maximum flow rate of 480 GPH.

Atmospheric vacuum breakers made of high-impact ABS. Keeps impure water from syphoning back into water supply. 3/4 in hose female thread inlet, 3/4 in male pipe thread outlet. Includes filter washer. Available in 3/4 in BSP threads.

Uniformly sprays water over a semicircular area with an adjustable radius of up to 8 ft. Sprayer inlet size of 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.

Converts one faucet to two separately controllable outlets. 3/4 in female hose thread inlet x 3/4 in male hose thread outlets.

Uniformly sprays water over a full circle with an adjustable diameter of up to 15 ft. Sprinkler Inlet size of 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.

Designed for use on level ground and shorter circuits. Ideal for heavy soil (clay).

Designed for use on level ground and shorter circuits. Self-cleaning turbulent flow dripper for use with 1/4 in tubing. Ideal for medium soil (loam). Color-coded as red/black base.

For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2GPH) - Ideal for heavy soil (clay). Black-(1GPH) - Ideal for medium soil(loam) Green -(2GPH) Ideal for light soil (sandy).

For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2 gph) - ideal for heavy soil (clay). Black (1 gph) - ideal for medium soil(loam) Green (2 gph) - ideal for light soil (sandy).

For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2 gph) - ideal for heavy soil (clay). Black (1 gph) - ideal for medium soil (loam) Green (2 gph) - ideal for light soil (sandy).

Designed for use on level ground and shorter circuits. Ideal for heavy soil (clay).

Designed for comfortable use. Punches holes 1/2 in, 5/8 in or 0.710 in hose to insert PC drippers or 1/4 in fittings.