Home > HAND TOOLS > SAFETY & ORGANIZATION > SAFETY EQUIPMENT > FALL PROTECTION DEVICES
Sort By:
1
Qualcraft Industries 00455-QC Reusable Temper Anchor Qualcraft Industries Ridge-It Single D-Ring Roof Anchor Qualcraft Industries 01813-QC Auto Lock Carabiner
The Guardian Fall Protection temper anchor is designed for use on wood, steel and concrete substrates. It can fit all roof pitches from flat to sheer, is composed of thick plated steel for longer lasting product life and is ideal for fall arrest and restraint applications. This anchorage connector can be installed with either screws or nails (depending on roof pitch) and its designed offset holes down the center help keep the truss from splitting. Supplied with all necessary fasteners (always use new fasteners for each new installation application). Qualcraft Industries Ridge-It Single D-Ring Roof Anchor, Stainless Steel, Dimensions: 9-3/4 in L, Includes: Nails Guardian Fall Protection double-locking carabiners (made from either steel or aluminum) are specially designed to be both supremely durable and easy to use. The gate is certified to withstand loads up to 3600 lb is self-closing and self-locking and can be opened with just one hand.
Qualcraft 01220-QC Safety Lanyards QualCraft 11200 Lightweight Internal Shock Lanyard QualCraft 1230 Shock Absorbing Lanyard
The shock absorbing lanyard is the premiere free fall lanyard offered by Guardian Fall Protection. It meets all the stringent ANSI Z359.13-2013 regulations and the integrated shock absorbing component limits average arresting forces to 900 lb or less. It is comprised of 1 in nylon webbing and is available in a variety of lengths and connector options, including steel and aluminum snap hooks and rebar hooks, all of which make it one of the most functional and durable lanyards on the market. Made with heavy-duty outer polyester webbing and a polyester core specifically sewn in to reduce impact forces. Does not stretch and has no shock pack, lightweight. The shock absorbing lanyard is the premiere free fall lanyard offered by Qualcraft Industries. It meets all the stringent ANSI Z359.13-2009 regulations and the integrated shock absorbing component limits average arresting forces to 900 lb or less. It is comprised of 1 in nylon webbing and is available in a variety of lengths and connector options, including steel and aluminum snap hooks and rebar hooks, all of which make it one of the most functional and durable lanyards on the market.
QualCraft 1295 Shock Absorbing Lanyard Qualcraft Industries 00711 Snappy Anchor QualCraft 01320-QC Vertical Lifeline
Ideal for work in tight spaces or around machinery, since its stretching capability helps reduce hazards of tripping or catching on moving parts. The lanyard stretches from between 4-1/2 to 6 ft and is available in a variety of connector options. Lightweight and its unique design eliminates the need for an external shock absorber. Qualcraft Disposable Snappy Anchor, Stainless Steel, Includes: Nails The Guardian Fall Protection poly steel rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10 to 15%, but unlike nylon, poly steel rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly steel is ten times stronger than polypropylene and while it may become fibrous, this is just a result of normal wear and does not indicate it needs to be replaced. It is 5/8 in THK and is available with a variety of component configurations, including a shock absorber, positioning device, 18 in extension lanyard and two double locking snap hooks.
ASSEMBLY REBAR POSITIONING    QualCraft 1285 Adjustable Shock Absorbing Lanyard Qualcraft 00815-QC Safety Kit
Qualcraft Rebar Positioning Assembly Ideal for positioning and restraint situations. Can be quickly adjusted from 4 to 6 ft L. Comes with a shock absorber. Qualcraft Bucket of Safe-Tie Kit, Specifications: 300 lb Capacity, Polyester/Polypropylene, Includes: UV Universal Harness with 5-Point of Adjustment, 50 ft Vertical Lifeline Assembly with Shock Pack, Positioning Device, 18 in Extension Lanyard, Temper Anchor with Fasteners
QualCraft 01310-QC Vertical Lifeline Guardian Fall Protection 1505 Removable Rope Grab Without Extension Qualcraft 17200 Aerial Lift Kit
The Guardian Fall Protection poly steel rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10 to 15%, but unlike nylon, poly steel rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly steel is ten times stronger than polypropylene and while it may become fibrous, this is just a result of normal wear and does not indicate it needs to be replaced. It is 5/8 in THK and is available with a variety of component configurations, including a shock absorber, positioning device, 18 in extension lanyard and two double locking snap hooks. Qualcraft Removable Rope Grab Without Extension Includes a universal fit harness HUV (01101) with an attached 6 ft internal shock lanyard (Sku 639.7582) and a heavy-duty ballistic nylon bag with Velcro closure (00762). The grommets on the bag allow for you to attach the bag to a lift basket.
Qualcraft Industries 00870 Safe-Tie Roofers Kit Qualcraft Industries 00805-QC Safe-Tie Hook Kit Qualcraft Industries 00830 Complete Roofer's Kit
The Lil' bucket of safe-tie is a roofing kit built for the roofer, by the roofer. The Lil' bucket of safe-tie comes with one HUV harness (different size options are available), one 6 ft single leg lanyard with shock pack and one nylon bag for equipment transportation and storage. Qualcraft Bucket of Safe-Tie Kit, Specifications: 300 lb Capacity, Polyester/Polypropylene, Includes: UV Universal Harness with 5-Point of Adjustment, 25 ft Vertical Lifeline Assembly with Shock Pack, Positioning Device, 18 in Extension Lanyard, Temper Anchor with Fasteners The bucket of safe-tie is a roofing kit built for the roofer, by the roofer. It is one of the few kits available on the market that includes a lifeline with an integrated shock absorber, which allows the worker to never have to worry about incorporating an additional shock absorbing lanyard into their fall protection system. Removing the shock absorbing component from the worker's back also results in less weight placed on the dorsal D-ring, resulting in an increase in comfort level and ease of movement. The bucket of safe-tie comes in a variety of configurations and can be customized for specific customer needs.
Qualcraft 10900-QC Retractable Lifeline Aramid Fiber Webbing QualCraft 20091 Adjustable Lanyard With Rebar CLAMP ROOF 2WAY STANDING SEAM
The Guardian Fall Protection Halo series web self-retracting lifeline (SRL), formerly the edge series web SRL, is designed with a specialized quick action braking system and is manufactured from non-corrosive, lightweight components. Extremely durable and compact, Halo SRLs will stand up to even the harshest working conditions. Ideal for work positioning and restraint applications. Quickly adjusts from 4 to 6 ft. Available with or without shock absorber. ANSI Z359.13-13, ANSI A10.32-13, OSHA 1926 Subpart M, OSHA 1910 applicable standards. Worker capacity range of 130 to 310 lb. Polyester and nylon webbing. The Guardian Fall Protection two-way universal standing seam clamp is lightweight, reusable and easy-to-use. This product possesses an all steel construction with galvanized finish making it very durable. Compatible with variety of standing seam designs.
CABLE SRL VELOCTY W/CRBNR 30FT Qualcraft 10915-QC Guardian Cable Retractable Lifelines
The new velocity SRL Series from Qualcraft Industries includes models with lengths ranging from 16 to 100 ft and is available with lifelines composed of either galvanized cable or webbing. Velocity SRLs feature swivel tops and swivel snap hooks as well as lightweight and durable glass-filled nylon housing. The Guardian Fall Protection Halo series self-retracting lifeline (SRL) is designed with a specialized quick action braking system and is manufactured from non-corrosive, lightweight components. Extremely durable and available with a variety of connector options, Halo SRLs will stand up to even the harshest working conditions.
   
 
1