|
|
|
|
|
|
|
|
|
|
|
|
|
|
Corner clamp is ideal for picture frames and smaller projects.
|
Pony Corner Clamp and Splicing, Maximum Clamping Range: 3 in
|
For use on large and irregular-shaped projects; the mechanical clamp parts are made of metal, the nylon band can hold up to 350 lb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This easy-to-use, compact clamp fits easily into tight spaces. Features a 2 in reach and clamps materials up to 2 in thick. Classic face clamps are designed for creating ideally flush Kreg joints and they work great for lots of other shop and project tasks that require solid clamping without marring. These clamps feature large clamp pads that distribute clamping force evenly and hold pieces flush during assembly. When used in Kreg joinery, the extra-large clamp face gets positioned on the "show" side of the joint. Classic face clamps are available in two sizes, 2 in reach and 3 in reach. Both have a simple screw that adjusts the clamp to match material thickness, plus comfortable padded handles. Both are compatible with the Kreg Jig? R3's clamp pad adapter.
|
The classic Pony band clamp is small, lightweight and easy to work with, featuring a high-strength band made of nylon webbing, four plastic corners to clamp miter joints and a positive-hold, self-locking aluminum cam and ratcheting handle for instant release. A black, rust-resistant finish is applied to the steel frame for added durability.
|
Designed to hold materials up to 3 in thick, at 90 deg angle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Pony angle clamp with table clamps is perfect for framing and cabinet assembly. Its plastic coated die-cast jaws won't damage your workpiece surfaces and the rear jaw swivels allow for easy adjustments, depending on material thickness. Generous clearance is provided for gluing, doweling or stapling material and acme threaded screws ensure maximum strength. Use with confidence for miters and butt joints up to two inches and for T???joints up to 1-1/8 in.
|
Every Jorgensen handscrew we make is crafted to ensure maximum strength and durability. Seasoned, straight grain hard maple wood jaws marry with cold-drawn steel spindles and nuts with special double lead threads. Together they create a handscrew clamp that holds tightly over broad areas, providing greater reach and a wider distribution of pressure than other clamps. The angle between the jaws can be adjusted to fit the work, allowing them to hold odd shapes easily. Our handscrew clamps are easy to apply and remove quickly and they provide protection against marring of finished surfaces. Traditional seasoned hardwood handles are designed for comfort now and for years to come.
|
Our Pony rapid acting band clamp is great for any round, rectangular or irregularly shaped medium-duty project. The acme threaded screw and aluminum levers allow you to tighten and release your project with ease. Its plastic jaws ensure a great fit on corners without marring your workpiece and its ergonomic grip ensures a great fit in your hands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Complete your cabinetry projects in a fraction of the time with Pony cabinet claw. This unique and patented tool combines the various steps of face frame cabinet installation into one easy process. The high-quality aluminum claws and alignment plate have protective rubber pads to cushion and protect cabinetry.
|
The Kreg? 90 deg corner clamp gives you the helping hand you need to hold 90 deg corners and T-joints together securely when you're assembling boxes, drawers, cabinets and cases. Plus, the 90 deg corner clamp leaves both of your hands free to add your fasteners. The 90 deg corner clamp is the fastest, easiest-to-use corner clamp you can buy thanks to Kreg Automaxx? auto-adjusting technology. The 90 deg corner clamp helps hold assemblies like boxes, cabinets, drawers and cases together to ensure that you get strong, tight-fitting assemblies - whether you're using Kreg pocket-hole joinery or another method. The clamp's V-wedge jaws grip the mating pieces securely, ensuring that the pieces sit at precise 90 deg angles while you drive in Kreg screws or even another type of fastener, such as a nail or wood screw. The 90 deg corner clamp features all-metal construction, including cast-aluminum pads - an outer V and inner wedge - that press against the inside and outside faces of the two pieces being joined in order to hold those pieces at a 90 deg angle to one another. Edge stops also help align the edges of the pieces to ensure accurate assembly of structures like boxes, cabinets, drawers and cases. Thanks to Automaxx? auto-adjust technology, all you have to do is squeeze the clamp handles. The clamp will automatically close with the amount of pressure you have set, regardless of the material, whether you're using thin plywood for drawers or materials up to 1 in thick.
|
These versatile clamps are perfect for creating flush-fitting assemblies with Kreg Joinery and they're great for project assembly, routing, cutting, sanding, drilling and more. Bench clamps work with clamp trak and plates, the clamp table, mobile project center and more to secure workpieces using an extra-large padded clamp face that evenly distributes clamping force.
|
|
|
|
|
|
|
|
|
|
|
|
|
The Bench clamp system combines a versatile 3 in bench clamp with an anodized-aluminum clamp plate to create a 360 deg clamping station that can be recessed into just about any wood surface, such as a workbench, sawhorse or worktable. The plate gets recessed into the surface. That way, the clamp can be removed by sliding it out of the keyhole slot in plate and the plate won't interfere with a flat work surface.
|
|
|
