|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featuring tungsten carbide teeth for maximum durability and a thin kerf for fast, smooth cuts, DeWALT? small diameter construction saw blades power through a variety of building materials with ease. Ribbed heat vents allow blades to run at cooler temperatures, reducing blade flexing and binding. Anti-stick coating minimizes friction and gum up.
|
Diablo thin kerf trim saw blade is ideal for portable and low powered saws on the jobsite. Diablo trim saw blade is proven to extend runtime on Porter Cable?, Saw Boss and similar trim saws.
|
Diablo thin kerf trim saw blade is ideal for portable and low powered saws on the jobsite. Diablo trim saw blade is proven to extend runtime on DeWALT? and similar trim saws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo finish blades are the ideal choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood.
|
Diablo finish blades are the perfect choice for excellent rips and crosscuts using a portable saw, they deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life, a great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood.
|
Diablo 4-1/2 in 36 tooth cordless trim saw blade includes a 3/8 in arbor. Diablo finish blades are the ideal choice for excellent rips and crosscuts using a portable saw while the super thin kerf helps extend the battery life on the saw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The best value for an economy blade. Corrosion resistant coating helps prevent rusting. Precision ground teeth for smooth, accurate cuts; slots for straighter cuts.
|
Diablo's ultra finish blades offer the quality that fine cabinetmakers expect with the capability to handle the extreme conditions of professional construction, Diablo's blade produces a remarkably clean, chip-free cut that requires little to no sanding, ideal for crosscutting oak, pine, melamine, veneer plywood and delicate molding, 6-1/2 in by 60 tooth, ATB, 5/8 in diamond twist out arbor.
|
Power through a variety of materials with this redesigned Circular Saw Blade that features cutting-edge engineering for up to 2X the life*.
Redesigned with proprietary heat-vents and a PTFE coating, this blade helps dissipate heat and limit binding for smooth performance for smooth performance across a wide range of applications. From framing to finish carpentry, these state-of-the-art DEWALT? Circular Saw Blades cut through tough jobs with ease.
*vs. prior design DEWALT 7-1/4 in. 24T circular saw blade with 3 heat vents, cutting double-stacked 3/4 in. x 48 in. particle board.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin kerf, 0.083 in, saw blades for miter saws and table saws. Precision tensioned and balanced blade for an accurate cut; #400 grit diamond ground teeth for a smooth finish. Alternate top bevel, 15 deg hook angle.
|
DEWALT Miter Saw Blade, 7-1/4 in Dia, Cutting Edge Material: Carbide, Number of Teeth: 40, Suitable for: DCS361 DeWALT Cordless Miter Saw
|
Diablo Circular Saw Blade, 6-1/2 in Diameter, 60 Teeth, Fine Grade, Applicable Materials: Wood
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Construction-grade carbide teeth for longer life with thin kerf for fast cuts; 400 grit diamond ground teeth for a smooth finish. Precision tensioned and balanced blade.
|
Ultra-thin kerf, 0.063 in, for more cuts per charge. Face ground carbide teeth for fast, clean cuts. Aggressive hook angle for fast cuts. Construction carbide teeth for longer life.
|
DEWALT Decking Saw Blade, 7-1/4 in Dia, 0.039 in Thick, Teeth Type: MTCG, Number of Teeth: 40, Arbor Size: 5/8 in, Hook Angle: 7 deg, Kerf: 0.063 in
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo finishing blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood. Diablo Finish blades are the ideal choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood.
|
Make precise cuts with these large diameter circular saw blades that deliver up to 3X life. Designed for increased accuracy, they feature optimized tooth geometry, specifically placed body slots and ultra sharp carbide tipped teeth for crisp, clean cutting. Built to exceed expectations during cutting applications, each blade is specifically designed by tooth count to increase performance and life.
|
Thin kerf, 0.071 in, saw blade for circular saws. Innovative heat vents and expansion slots for straighter cuts. Reinforced shoulder for durability. Designed for framing and ripping. Alternate top bevel, 20 deg hook angle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin kerf saw blade for miter saws and table saws. Used for crosscutting oak, pine, malamine, plywood and moulding. Alternate top bevel, .071" plate, .098" kerf, 15 degree hook angle.
|
Thin kerf saw blade for miter and table saws. Used for crosscutting oak, pine melamine, veneer, plywood and delicate molding. Laser cut stabilizer vents for reduced vibration and precise cuts.
|
Thin kerf, .087", saw blade for sliding miter saws and radial arm saws. Laser cut stabilizer vents for reduced vibration and precise cuts. Durable MicroGrain Titanium Carbide for razor sharp cuts and long life. PermaShield permanent coating prevents gumming and corrosion. Used for crosscutting oak, pine, malamine, plywood and moulding. Alternate top bevel, .063" plate, 7 degree hook angle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.6 mm plate, 0.095 in kerf.
|
Thin kerf saw blade for table saws. Used for crosscutting oak, pine, malamine, plywood and moulding. Alternate top bevel, .087" plate, .0118" kerf, 15 degree hook angle.
|
For miter/slide miter and table saw. Non-stick permashield coating. Axial shear face grind tooth geometry..087" ultra thin kerf, 10-degree hook angle, and 7,000 max rpm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Irwin? is proud to introduce a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry leading laser-cut, thin kerf saw blades are produced in a highly automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish professional woodworkers and finish carpenters demand.
|
For on-the-job cutting of wood, non ferrous metal such as copper pipe, aluminum extrusions, brass plate, plastics and laminates. For miter/slide miter saws. Triple chip grind tooth design. .091" thin kerf, negative 5-degree hook angle and 6,000 max rpm.
|
Blade is used to cut laminate flooring, double sided laminates, and melamines cleanly. The triple chip grind (TCG) tooth design gives clean, chip free cuts and longer life in abrasives. Laser cut stabilizer vents for reduced vibration and precise cuts. Durable micrograin titanium carbide teeth for razor sharp cuts and longer life. Perma Shield permanent coating prevents gumming and corrosion. Laser cut thin kerf design gives fast clean cuts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Irwin? is proud to introduce a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry leading laser-cut, thin kerf saw blades are produced in a highly automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish professional woodworkers and finish carpenters demand.
|
Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.6 mm plate, 0.095 in kerf.
|
Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.8 mm plate, 0.095 in kerf, 15 deg hook angle.
|
|
|
