Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES > ANCHOR SHACKLES
Sort By:
1 2
Fehr Bros 1/4IN Anchor Shackle Midland Big Orange 081163/MC645G Anchor Shackle SHACKLE ANCHOR SCRW PIN 3/16IN
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Baron Anchor Shackle, Working Load Limit: 0.3 ton, Trade Size: 3/16 in, Pin Type: Screw, Pin Diameter: 1/4 in, Steel, Hot-Dipped Galvanized
Midland Big Orange 081253/MC647G Anchor Shackle Fehr Bros 3/16 Anchor Shackle SHACKLE ANCHOR GALV 3/16IN
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. National Hardware Anchor Shackle, Working Load Limit: 650 lb, Trade Size: 3/16 in, Inside Width: 11/16 in, Wire Diameter: 7/32 in, Width Between Eyes: 11/32 in, Pin Type: Screw, Pin Diameter: 1/4 in, Pin Material: Steel, Steel, Galvanized, Suitable for: Rope or Chain, Includes: Removable Screw Pin
Midland Big Orange 081293/MC648G Anchor Shackle SHACKLE ANCHOR SCREW PIN 3/8IN Fehr Bros 5/16 Anchor Shackle
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Baron Anchor Shackle, Working Load Limit: 1 ton, Trade Size: 3/8 in, Pin Type: Screw, Pin Diameter: 7/16 in, Steel, Hot-Dipped Galvanized Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
Midland Big Orange 081343/MC649G Anchor Shackle Fehr Bros 3/8 Anchor Shackle SHACKLE ANCHOR SS 3/16IN
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. National Hardware Anchor Shackle, Working Load Limit: 650 lb, 316 Grade, Trade Size: 3/16 in, Inside Length: 15/16 in, Inside Width: 5/8 in, Wire Diameter: 3/16 in, Width Between Eyes: 11/32 in, Pin Type: Screw, Pin Diameter: 1/4 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain
National Hardware N223-677 Anchor Shackle SHACKLE SCRW PIN HT GALV 3/8IN SHACKLE ANCHOR SCRW PIN 7/16IN
National Hardware 3250BC Anchor Shackle, Working Load Limit: 1500 lb, Galvanized Steel Baron Anchor Shackle, Working Load Limit: 1-1/2 ton, Trade Size: 7/16 in, Pin Type: Screw, Pin Diameter: 1/2 in, Steel, Hot-Dipped Galvanized
Midland Big Orange 081373/MC650G Anchor Shackle SHACKLE ANCHOR SCREW PIN 1/2IN Fehr Bros 1/2 Anchor Shackle
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
SHACKLE ANCHOR SS 1/4IN SHACKLE ANCHOR SS 5/16IN SHACKLE ANCHOR SCREW PIN 3/4IN
National Hardware Anchor Shackle, Working Load Limit: 1100 lb, 316 Grade, Trade Size: 1/4 in, Inside Length: 1-1/32 in, Inside Width: 25/32 in, Wire Diameter: 1/4 in, Width Between Eyes: 1/2 in, Pin Type: Screw, Pin Diameter: 5/16 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain, Includes: Removable Screw Pin National Hardware Anchor Shackle, Working Load Limit: 1650 lb, 316 Grade, Trade Size: 5/16 in, Inside Length: 1-3/16 in, Inside Width: 27/32 in, Wire Diameter: 9/32 in, Width Between Eyes: 9/16 in, Pin Type: Screw, Pin Diameter: 13/32 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain Baron Anchor Shackle, Working Load Limit: 4-3/4 ton, Trade Size: 3/4 in, Pin Type: Screw, Pin Diameter: 7/8 in, Steel, Galvanized
SHACKLE D SS 1/4IN Fehr Bros 5/8 Anchor Shackle SHACKLE ANCHOR SS 3/8IN
National Hardware D-Shackle, Working Load Limit: 1000 lb, Trade Size: 1/4 in, Inside Length: 7/8 in, Inside Width: 15/32 in, Pin Hole Diameter: 5/16 in, Width Between Eyes: 15/32 in, 316 Grade, Stainless Steel, Smooth, 19/32 in W, 1-9/16 in H Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. National Hardware Anchor Shackle, Working Load Limit: 2200 lb, 316 Grade, Trade Size: 3/8 in, Inside Length: 1-3/8 in, Inside Width: 1 in, Wire Diameter: 3/8 in, Width Between Eyes: 21/32 in, Pin Type: Screw, Pin Diameter: 15/32 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain, Includes: Removable Screw Pin
SHACKLE D SS 5/16IN SHACKLE ANCHOR SCREW PIN 5/8IN Midland Big Orange 081443/MC651G Anchor Shackle
National Hardware D-Shackle, Working Load Limit: 1700 lb, Trade Size: 5/16 in, Inside Length: 1-3/32 in, Inside Width: 9/16 in, Pin Hole Diameter: 13/32 in, Width Between Eyes: 9/16 in, 316 Grade, Stainless Steel, Smooth, 3/4 in W, 1-31/32 in H Baron Anchor Shackle, Working Load Limit: 3-1/4 ton, Trade Size: 5/8 in, Pin Type: Screw, Pin Diameter: 3/4 in, Steel, Hot-Dipped Galvanized Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.
SHACKLE D SS 3/8IN Fehr Bros 3/4 Anchor Shackle ANCHOR SHACKLE GALV 3/4
National Hardware D-Shackle, Working Load Limit: 2000 lb, Trade Size: 3/8 in, Inside Length: 1-9/32 in, Inside Width: 11/16 in, Pin Hole Diameter: 15/32 in, Width Between Eyes: 11/16 in, 316 Grade, Stainless Steel, Smooth, 15/16 in W, 2-11/32 in H Fehr Anchor Shackle, Working Load Limit: 3.25 ton, Commercial Grade, Trade Size: 3/4 in, Pin Type: Screw, Pin Diameter: 7/8 in, Pin Material: 1045 Steel, Steel, Hot-Dipped Galvanized National Hardware Anchor Shackle, Working Load Limit: 10,000 lb, Trade Size: 3/4 in, Inside Width: 2 in, Width Between Eyes: 1-5/16 in, Pin Type: Removable Screw, Pin Diameter: 7/8 in, Pin Material: Steel, Steel, Galvanized
   
 
1 2