|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
With bolt, nut and washer. Pack loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
Designed as a support bracket for Stanley's 105270, 105676, 105213 and 105726 box rail at 24 in OC intervals. Includes lags. Display packed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use as a door stop on up to 2 in thick sliding doors. Embossed steel for added strength. Display packed.
|
Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lb.
|
Designed to join two pieces of Stanley's 105270, 105676, 105213 and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Without screws. Each loose.
|
Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4 in thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed.
|
Boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to hold wood and metal doors firmly in place against the door jamb on farm and utility buildings. It also can be used for end gates on stake trucks. Offers 7 in hook. Designed for right- or left-hand applications. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in thick door frames. Boxed.
|
National Hardware COLORmaxx Single Axle Box Rail Hanger, Specifications: 150 Safe Working Load, Steel, Zinc, Dimensions: 3.12 in L x 2.149 in W x 1.5 in H
|
Designed for bi-parting wood sliding doors at least 1-1/2 in thick. Cam action and adjustable hook holds doors tightly together. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in thick door frames. 15 in long hook. Boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to press into rail to keep rail free of foreign materials from birds or weather. Can be used as center stop using 3/8 x 2 in carriage bolts (not furnished). Often packed with box hangers.
|
Designed for use on wood-frame, metal-clad doors using a 2 x 4 in or 2 x 6 in frame with Stanley's 105270, 105676, 105213 and 105726 box rail. Includes two washers, 4 hex nuts and two end caps per pair. Made of durable one-piece, precision-formed steel. Offers self-lubricating Delrin bearings. The 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7 in adjusted laterally 1 in by turning offset bolt for desired clearance. Can hold 450 lb per pair. 9 in bolt. Boxed.
|
Designed for use with box rail. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Includes truck, connecting bolt and nuts. Packed without end caps. Made of durable one-piece, precision-formed steel. Comes with self-lubricating Delrin bearings. Safe working load - 225 lb per hanger. 2.14 in roller diameter. 4-1/2 in bolt length, 4.49 in overall length, 1.61 in overall height. BHMA A138.18.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Box Rail Hanger, Steel, Zinc, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 Box Rail, Includes: Connecting Bolt and Nuts, Truck
|
National Hardware Rail Hanger, 6 in, 225 lb Weight, Dimensions: 2 in L x 3 in W x 2 in H, Steel, Zinc, Suitable for: Model #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 Box Rail, Includes: Truck, Connecting Bolt, Nuts
|
Rigid with single door strap. Designed for use on wood-frame sliding doors from 1-1/2 in to 2 in thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Rail Hanger, 300 lb Weight, Bearing Type: Roller, Roller Width: 1.61 in, Roller Diameter: 2.14 in, Shaft Diameter: 0.42 in, Steel, Zinc, Dimensions: 5.38 in L x 4.51 in W x 1.61 in H, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 Box Rails
|
Flexible with single door strap. Designed for use on wood-frame sliding doors from 1-1/2 to 2 in Thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pounds capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed.
|
Designed for use with box rail on wood-frame, metal-clad door using a 2 x 4 in or 2 x 6 in frame. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Packed with four washers, four hex nuts and two end caps per pair. 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7 in adjusts laterally 1 in by turning offset bolt for desired clearance. Durable one-piece, precision formed steel. Each hardened axle has 12 hardened and precision-ground alloy steel roller-bearings. Delrin seals keep out dirt while holding in long-life grease. Safe working load - 300 lb per hanger. 9 in bolt.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Box Rail Hanger, 300 lb Weight, Dimensions: 6 in, Steel, Zinc, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114, #5116 Box Rail, Includes: 6 in Bolts, Nuts
|
Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12 in L x 3.25 in W x 2 in D. Can be used with flashing with the 5151 flashing bracket. One splice bracket should be installed on every length of rail to lock it in place.
|
Designed for single sliding or bi-parting metal or wood doors. Intended to take abuse from trucks, tractors and farm machinery when used around factory and farm buildings. Smooth ramp on each side of the guide prevents cutting tractor or truck tires. Mounts on concrete floors with lag screws and shields or on a 6 in x 6 in post. 1/2 in rod or bolt inserted through hole in each side will serve as a center stop for bi-parting doors. Meets ANSI/BHMA, A 156.14. Manufactured from hot-rolled steel. Boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Rail Hanger, 5 in, 300 lb Weight, Steel, Zinc
|
Designed to be used with #5400 round rail to mount double runs of rail for by-passing doors to side of building installation. Includes lag bolt, (2) carriage bolts and (2) nuts. (1) Bracket should be installed every 2 ft of rail. Suitable for use on corrugated metal siding due to narrow mounting surface.
|
Designed for use with round rail on wood-frame, metal-clad doors using a 2 x 6 in top lateral. 1/2 in offset 9 in bolt (with 7 in thread) adjusts door vertically and laterally (1 in) from inside building. Flexible trunnion design resists door damage. Precision-ground and hardened steel roller bearings, axles and sleeves provide longer life and easier operation. Interchangeable with other brands of round rail. Safe working load - 300 lb per hanger.
|
|
|
