|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used on side by side hinge placements for added strength. Factory lubricated, steel inner race with 10 ball bearings. Roller 1-7/8 in OD.
|
Used by most garage door manufacturers. Roller tube accepts a standard 7/16 in OD stem roller. Made of 14 ga galvanized steel, 3 in OAW. Includes four 1/4 in-20 x 1-7/8 in pancake head carriage bolts with nuts.
|
Heavy-duty galvanized steel pulley with galvanized steel strap. Case hardened steel race with steel ball bearings. Factory lubricated and can be used at stationary or spring pulley positions. The width of the groove measures 5/16 in from inside wall to inside.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by most garage door manufacturers. Roller tube accepts a standard 7/16 in OD stem roller. Made of 14 ga galvanized steel, 3 in OAW. Includes four 1/4 in-20 x 1-7/8 in pancake head carriage bolts with nuts.
|
Replaces most handles currently in use. Galvanized steel construction. Use vertically or horizontally. Includes two 1/4 in - 20 x 1-7/8 in pancake head carriage bolts with nuts.
|
High-impact plastic for good performance and quiet, trouble-free operation in all weather environments. Roller 1-7/8 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Factory lubricated, steel inner race. Fits 2 in standard J-track. Roller 1-7/8 in OD.
|
Used by most garage door manufacturers. Roller tube accepts a standard 7/16 in OD stem roller. Made of 14 ga galvanized steel, 3 in OAW. Includes four 1/4 in-20 x 1-7/8 in pancake head carriage bolts with nuts.
|
Heavy-duty galvanized steel construction; accepts a 5/16 in square shaft locking handle, used by Frantz and others as a lever mechanism to disengage side latches.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Short stem heavy-duty roller with steel inner race, 10 ball bearings. Includes 2 roller assemblies. Roller 1-7/8 in OD.
|
Galvanized carbon steel aircraft cable used on 7 ft H torsion spring doors.
|
Factory lubricated, steel inner race. Fits 2 in standard J-track. Roller 1-7/8 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized carbon steel aircraft cables used on extension spring doors. 1/8 in replaces most wood doors, 3/32 in replaces most fiberglass and aluminum doors.
|
Used on both wood and metal doors. Heavy-duty 13 ga galvanized steel construction and steel cable pin. Accepts a standard 7/16 in OD stem roller. Includes left and right hand brackets.
|
Factory lubricated, steel inner race. Fits 2 in standard J-track. Roller 1-7/8 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty galvanized steel pulley with galvanized steel strap. Case hardened steel race with steel ball bearings. Factory lubricated and can be used at stationary or spring pulley positions. This pulley is designed to support steel cables up to 3/16 in Dia.
|
Galvanized carbon steel aircraft cables used on extension spring doors. 1/8 in replaces most wood doors, 3/32 in replaces most fiberglass and aluminum doors.
|
Heavy-duty galvanized steel, spring-loaded slide-bolt lock with latch bolt release lever for overhead garage doors. Used with GD-52147 outside lock and latch assembly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Works only from inside for extra protection as a night or vacation security lock. Fits most garage doors. Engages slot in vertical track. 7/8 in W x 1/8 in thick steel slide bolt with heavy-duty galvanized steel housing. Includes lock assembly and four 1/4 in-20 x 1-7/8 in pancake-head carriage bolts with nuts.
|
Heavy-duty zinc die-cast housing with brass face and 5-pin tumbler lock. Used to key lock a variety of interior latching mechanisms. Can be purchased keyed-alike via special order to be used separately or with GD-52119 center mount deadbolt lock.
|
Galvanized carbon steel aircraft cable installs through extension springs to prevent injury in case of breakage. Required on California installations. Use 4 cables for dual spring doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty galvanized steel pulley with galvanized steel strap case hardened steel race with steel ball bearings factory lubricated can be used at stationary or spring pulley positions. The width of the groove measures 5/16 in from inside wall to inside.
|
Prime-Line Winding Rod, Hard Drawn Wire, Specifications: 1/2 in Diameter X 16 in Length, Steel
|
Zinc die-cast construction, keyed lock, 5/16 in square shaft, 4-5/8 in long, 1-1/2 in hole centers, replaces many garage door, camper and R.V locking handles. Screws attach to lock from the inside of door. Contains 1 locking handle, 2 keys.
|
|
|
