Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (NON-WELL) > UTILITY PUMPS
Sort By:
1
Gt Water WP-25 Pump-A-Lot Superior Pump 91250 Continuous Duty Submersible Utility Pump Franklin Electric RL-MP16 Submersible Utility Pumps
Includes one water pump model WP10, with 12 ft, 1-1/4 in discharge hose. Powered by water, uses no electricity. There are no moving parts and no motors to burn out. Power is regulated by hose bib which pumps to within 1/8 in of surface. Non-corrosive and uses 1-1/4 or 1-1/2 in discharge hose. Pumps approximately 800 gal of water per hour. Safe and easy to use. Boxed. 1/4 hp split capacitor motor, high efficiency, low amp draw, 10 ft grounded waterproof power cord, pumps up to 30 gpm, 1800 gph, side and bottom intake provides for clog-resistant suction, cooler operating 115 V motor provides continuous duty, pump will lift water over 25 ft. vertical height, 1-1/4 in male iron pipe discharge thread, standard hose adapter included. 1 year warranty from Superior Pump Co. Manual, submersible pump. Ideal for dewatering applications. Reinforced thermoplastic construction will not rust or corrode. Screened bottom intake design removes water to within 3/16 in of surface. Rated at 1300 gph.
Wayne VIP15 Submersible Utility Pumps Sta-Rite FPOS1300X Flotec Sta-Rite FP0S1250X-08 Flotec
1/3 hp reinforced thermoplastic submersible multi-use pump. The Tempest? is a multi-purpose pump for a variety of household dewatering tasks including sump draining, emptying ponds and aquariums. Good, dependable performance marks this product as the solution for many home de-watering applications.
Sta-Rite 2305 Simer Sta-Rite M40P Simer PUMP UTILITY SUBMERSIBLE 1/6HP
Whether you need to remove water from a window well, basement or rooftop, this portable pump is versatile enough for the job. Non-submersible, multi-purpose pump designed for emergency dewatering, draining aquariums, waterbeds and clogged sinks. Pumps up to 350 gph. Pumps down to 1/8 in. Corrosion-resistant compact construction maximizes pump life. Self-priming at 6 ft vertically, pump will push water 40 ft high. Easy to use. Includes 6 ft power cord, 6 ft garden hose and suction attachment. CSA certified. The Wayne WWB WaterBUG? submersible water removal pump with multi-flow technology, is the tool for you, our patent pending multi-flo technology is key and allows the user, easy selection of the appropriate discharge for the water removal application. The top discharge should be used to drain water from confined spaces, a window well, laundry tub, even from 5 gal buckets. Side discharge should be selected for easy water removal from open areas, flat roofs, flooded basements, shower stalls, flooded yard. Our patent pending multi ring suction strainer filters debris, keeping it clear from the suction intake which minimizes clogging. This powerful tool pumps up to 1350 gal/Hr, connects to a standard garden hose and removes water down to a 1/16 in of the surface, making the area virtually dry, for quality you can trust. Stop allowing water to bug you. Remove it with WaterBUG? Wayne's WaterBUG? submersible water removal pump with multi-flo technology, is the water removal tool for every home. Wayne WaterBUG's? patent pending multi-flo technology is key and allows the user, easy selection of the appropriate discharge for any water removal application. Our easy to clean, multi ring suction strainer removes water down to virtually dry at 1/16 of an in. Proudly assembled in the USA, for quality you can trust.
Sta-Rite 2300 Simer Sta-Rite BW85P Non-Submersible Utility Pump PUMP HYDROPONIC 1200 GPH
The Simer? Geyser? classic is one of the most durable, heavy-duty constructed utility pumps in the market today. Non-submersible, multi-purpose pump designed for a variety of applications: emergency draining, emptying water-logged septic systems, water garden supply and water transferring. Pumps up to 450 gph. Pumps down to 1/8 in. Corrosion-resistant, compact construction maximizes pump life. Easy to use. Includes 6 ft garden hose, 6 ft battery clamp motor cord and suction attachment. Pumps 1200 gph at 1 ft. Quiet operation for a better indoor experience. Corrosion and rust-resistant epoxy-coated cast aluminum pump housing. Removes water to within 1/8 in of surface. Bottom intake design with pre-screen to protect against debris.
Sta-Rite FPOS1775A Flotec Wayne PC4 Electric Non-Submersible Utility Pump Simer 2825SS Non-Submersible Utility Pump
The IntelliPump?, just plug this pump in and it automatically checks for traces of water, whether you are pumping basements or draining puddles. This self-priming portable utility pump is designed to be used as a transfer pump for such applications as emptying water heaters, livestock tanks and more. Pump can also be used for an intermittent pressure boost for applications such as washing cars, cleaning driveways and more. The motor is air cooled, it is not designed to operate under water. Use as a portable sprinkler or water transfer pump. Ideal for boosting pressure to wash cars, boats and lawn sprinkling. Supports multiple lawn sprinklers pumping from lakes, streams or ponds. Maximum pumping capacity to 10 gpm. Pressures to 80 psi, suction lifts to 20 ft. Continuous duty rated, 1 hp, 115 V motor. Stainless steel pump housing with excellent self-priming capability. 1 in threaded suction and discharge, garden hose fitting and 6 ft power cord included.
Tsurumi HS Agitator Trash Pump Pacer SE2PLE550 Centrifugal Pumps Tsurumi LB-480-62 Electric Centrifugal Pump
Handles up to 20% of sand, solids, leaves and debris without clogging. Semi-vortex urethane rubber impeller with shaft mounted agitator suspends solids and allows for pumping of sand and stringy material. Continuous duty, air filled copper wound motor with class B insulation. Built-in thermal protection prevents motor failure due to overloading, accidental run-dry and single phasing in three phase units. Double inside mechanical seals with silicon carbide faces (both top and bottom) run in an oil filled chamber. Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life or 60,000 hrs provide for extended operational life. 2 years commercial warranty. Pacer's S Series self-priming centrifugal pumps are light-weight and chemically resistant for general service on water, salt water, waste water, mild acids and bases. This is our most popular pump across multiple markets. They feature stainless steel internal fasteners, Viton?, EPDM or Buna O-ring with stainless steel external fasteners. There is a non-metallic option which minimizes solution contact with internal metal parts. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton?. Polyester models are available with or without lined volute for abrasion resistance. LB-480 Slimline design pump allows to fit into 8 in pipes. Powerful pumps built with durable materials in an easy handling design. Top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels and extended dry-run capability.
Pacer SE2ULE950 Centrifugal Pumps Honda Gx TE Gasoline Powered Centrifugal Pump
Pacer's S Series self-priming centrifugal pumps are light-weight and chemically resistant for general service on water, salt water, waste water, mild acids and bases. This is our most popular pump across multiple markets. They feature stainless steel internal fasteners, Viton?, EPDM or Buna O-ring with stainless steel external fasteners. There is a non-metallic option which minimizes solution contact with internal metal parts. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton?. Polyester models are available with or without lined volute for abrasion resistance. Powerful, light-weight pumps with 2 in NPT coupling powered by heavy-duty, powerful Honda GX Series gas engines.
   
 
1