Contains 2 high watt density elements #02342 4500 W 240 V, 1 TOD lower thermostat #08122 and 1 TOD upper thermostat #08162.

UL listed. Gasket included. 208V 3500W or 240V 4500W

Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP.

Extends the life of a water heater by attracting corrosive elements in the water, protecting the tank and elements from corrosion.

Seamless corrugated 18 in flexible copper water connectors. 125 psi maximum.

Use CAMCO dielectric unions wherever dissimilar metals occur in piping and plumbing systems. Use in water heaters pressure rated to 350 psi, water storage tanks, gas piping, air conditioning, water conditioners, oil piping, water pumps and steam lines.

UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating.

The CAMCO flared dip tube is a non-metallic tube that directs incoming cold water to the bottom of the tank and can be cut to length.

The CAMCO Apcom style lower thermostat features a single pole with a built-in safety switch that prevents overheating. The temperature range is adjustable from 110 to 160 deg F, adjust only the lower thermostat.

Contains (1) 2-1/2 in 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16 in to [no. 18] 5/8 in hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit.

Contains 2 high watt density elements #02342 4500w 240 V, 1 Apcom style lower thermostat w/protector #07722, 1 Apcom style upper thermostat w/protector #07862.

UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating.

UL listed. Gasket included.

The Copper Connector Kit is designed for use with gas systems. The connecting kit is used where cold supply or hot distribution lines are 3/4 in copper and not threaded. The kit includes two 3/4 in x 15 in flexible water connectors, one roll of Teflon tape, two 3/4 in NPT compression adapters and one 1/2 in x 24 in stainless steel gas connector. Tools for installation not included.

The Copper Connector Kit is designed for use with gas or electric systems. The connecting kit is used where cold supply or hot distribution lines are 3/4 in copper and not threaded. The kit includes two 3/4 in x 15 in flexible water connectors, one roll of Teflon tape, two 3/4 in NPT compression adapters and one 1/2 in x 24 in stainless steel gas connector. Tools for installation not included.

CAMCO's 3/4 in temperature and pressure valve with 4 in probe will help protect your RV or home water heater from excessive temperature and water pressure. It's factory set at 150 psi and 210 deg F. It features epoxy-coated probe to prevent corrosion buildup.

CAMCO 11523 3/4 in plastic water heater drain valve features an all plastic valve that fits directly into water heater for easy draining. 3/4 in pipe thread x 3/4 in male hose thread.

Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C), Pressure relief range is 75 to 150psi (5.2 to 10.3 bar).

UL listed. Gasket included.

UL listed. Gasket included.

UL listed. Gasket included.

The 2-1/2 in dielectric nipple is designed for use in water heater inlet and outlet hook-ups and for other uses where dissimilar metals occur in piping and plumbing systems. The thermoplastic lining helps prevent corrosion and the ends are 3/4 in NPT tapered pipe thread for a fluid-tight seal. Dielectric nipple measures 2-1/2 in Length and is sold in a convenient 2-pack.

UL listed. Gasket included.

UL listed. Gasket included.

CAMCO RV 1500 W universal element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a universal style flange. Gasket and complete instructions are included.

UL listed. Gasket included.

UL listed. Gasket included.

CAMCO RV 1500 W universal element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a screw-in style flange. Gasket and complete instructions are included.

CAMCO's 4500 W/240 V screw-in foldback type ultra-low watt density water heater elements are better suited for areas with problem water. The ultra LWD of this element helps prevent lime deposits and the high-performance nickel-chromium stainless steel alloy sheath gives it additional strength to resist dry firing. The combined effect make the element better suited for use in areas with problem or intermittent water supply.

1-1/4 in shank length. Heavy brass construction. Neoprene seal disc. 3/4 in hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7.