Handheld Power Tools Online

1/2 Inch Dr. Super-Duty Air Impact Wrench

• Lightweight, magnesium Housing and powerful twin -hammer clutch for the toughest jobs!
• Supplies over 550 ft.lbs maximum applied torque, with 900+ ft/lbs of break-away torque power to spare.
• Features a comfort-grip, muffled-exhaust handle for quiet, efficient operation
• One year over-the-counter warranty.

SAVE ON SHIPPING IF YOU ARE LOCAL!
We can have you pick up in Stillwater, Blackwell, or Cushing Oklahoma.

10 PC COBALT DRILL SET

1/16 to 1/2 by 64ths Made In The USA. Cobalt drills are designed to cut through extremely hard metals, including stainless steel. No center punch needed: Century 135" Quick Cut Points are self-centering and penetrate faster with less pressure… will not "walk" or "wander" at the starting surface. Extremely heat resistant, must be used and operated in power units that have RPM speed of 1,500 or more for maximum efficiency. Aerospace NAS 907-J specifications.

10 pc Reverse Drill & Screw Extractor Set

• 5 Reverse Drill Bits, sizes 5/64, 7/64, 5/32, 1/4, 19/64"
• 5 Screw Extractors, sizes #1 - 5
• Includes sturdy metal storage box

10 Piece Century Drill & Tool Screw Extractor Drill Set

Includes 1/16 to 3/8 by 64ths import drills. Cobalt drills are designed to cut through extremely hard metals, including stainless steel. No center punch needed: Century 135" Quick Cut Points are self-centering and penetrate faster with less pressure… will not "walk" or "wander" at the starting surface. Extremely heat resistant, must be used and operated in power units that have RPM speed of 1,500 or more for maximum efficiency. Aerospace NAS 907-J specifications.

13 PC BRITE DRILL BIT SET

1/16 to 1/4 by 64ths drills. Brite industrial drill bits feature premium grade high speed steel for general purpose drilling in wood, metal and plastic. No center punch needed: Century Quick Cut Points are self-centering and penetrate faster with less pressure… will not "walk" or "wander" at the starting surface

2-5/8 SHARK HOLESAW ECO

Shark Tooth bi-metal hole saws. Shark Tooth hole saws are professional bi-metal saws with cobalt high speed steel teeth, electron welded to shatterproof, shock absorbing alloy bodies. Shark Tooth's variable pitch tooth pattern cuts clean through stainless steel, brass, aluminum, pipe steel, nail embedded wood, hardwood, plywood, sheet metal, fiberglass and plastic. Suggested RPM's are for cutting mild steel. Decrease RPM's by 30% for cast iron. Increase RPM's by 30% for brass and aluminum. Hole saws are shipped without arbors, arbors are sold separately. Can be used in portable electric drill machines, lathes and milling machines. 8% cobalt.

21PC COBALT DRILL SET

Includes 1/16 to 3/8 by 64ths import drills. Cobalt drills are designed to cut through extremely hard metals, including stainless steel. No center punch needed: Century 135" Quick Cut Points are self-centering and penetrate faster with less pressure… will not "walk" or "wander" at the starting surface. Extremely heat resistant, must be used and operated in power units that have RPM speed of 1,500 or more for maximum efficiency. Aerospace NAS 907-J specifications.

29 PC COBALT DRILL SET

Includes 1/16 to 1/2 by 64ths import drills. Cobalt drills are designed to cut through extremely hard metals, including stainless steel. No center punch needed: Century 135" Quick Cut Points are self-centering and penetrate faster with less pressure… will not "walk" or "wander" at the starting surface. Extremely heat resistant, must be used and operated in power units that have RPM speed of 1,500 or more for maximum efficiency. Aerospace NAS 907-J specifications.

29PC BLACK OXIDE DRILL BIT SET

Includes 1/16 to 1/2 by 64ths import drills. Manufactured from industrial high speed steel, surface treated for high performance and long life. Designed to drill common steel (flat bar, angel iron, tubing) wood and plastic. No center punch needed: Century Quick Cut Points are self-centering and penetrate faster with less pressure… will not "walk" or "wander" at the starting surface. Manufactured to Aerospace NAS 907-B specifications.

5PC SCREWDRILL BIT SET

Screw Drill Set, #4, #6, #8, #10 and #12. Four flute design for perfectly defined countersinks. Drill the correct pilot hole and recess for countersinking all in one step. Includes replaceable H.S.S. drill bit. Loosen to adjust depth for variable length screws.

8 PC S&D INDEX SET

8pc S & D Index Set Includes: 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1" metal pop-up index. Industrial S & D Drills, Silver & Deming style drill bits, 118 degree point. Duo-tone black oxide and polished finish for fast chip removal, keeping the bit cool and reducing wear. High speed steel will remain sharper while drilling large diameter holes in ferrous and non-ferrous steels and other materials where large diameter holes are required. Reduced 1/2" shank fits all 1/2" or larger chucks.

8 PC S&D INDEX SET

8pc S & D Index Set Includes: 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1" metal pop-up index. Industrial S & D Drills, Silver & Deming style drill bits, 118 degree point. Duo-tone black oxide and polished finish for fast chip removal, keeping the bit cool and reducing wear. High speed steel will remain sharper while drilling large diameter holes in ferrous and non-ferrous steels and other materials where large diameter holes are required. Reduced 1/2" shank fits all 1/2" or larger chucks.

8 PC S&D INDEX SET

8pc S & D Index Set Includes: 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1" metal pop-up index. Economy S & D Drills, Silver & Deming style drill bits, 118 degree point. Surface treated to ward off heat and friction commonly found in heavy duty drilling jobs. Reduced 1/2" shank fits all 1/2" or larger chucks.

Black+Decker DR260C/B Drill/Driver, 5.2 A, 3/8 in Chuck, Keyless Chuck, 8 ft L Cord

Features variable speed reversing for controlled drilling and driving, bubble level, on-board bit storage. 0 to 1500 rpm, capacity in steel is 3/8 in, wood 1 in. Includes one double-ended screwdriving bit and storage bag.

Bostitch F33PT Framing Nailer, 80 Magazine, 30 deg Collation, Paper Collation, 2 to 3-1/2 in Fastener, 0.075 cfm Air

This 33 deg paper tape framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button. depend on this 33 deg paper tape framing nailer for efficiency.

DEWALT DW2503 Drill Bit Set, Quick-Change, 20-Piece, Steel

Compact magnetic drive guide holds 1 in bit tips. Rapid load quick change accessory system. Use for woodworking, construction, electrical work, remodeling and plumbing. Fits in drill/driver and 7-in-1 screwdrivers. Includes tough case container.

DEWALT DWE5010 Hammer Drill, 7 A, Keyed Chuck, 1/2 in Chuck, 0 to 2800 rpm Speed

The DWE5010 1/2 in single-speed hammer drill has a powerful motor to drive high-speed drilling in dual modes at the user's desired speed. Constructed with a lightweight design and two-finger, rubber trigger for user comfort.

Ingersoll Rand 1077XPA Air Ratchet Wrench, 1/2 in Drive, Square Drive, 10 to 45 ft-lb, 4 cfm Air

The advanced head design of the 1077XPA 1/2 in and 107XPA 3/8 in ratchet wrenches provide increased durability to one of the industry's most popular ratchets.

Ingersoll Rand 2100G Air Impact Wrench, 1/2 in Drive, 550 ft-lb, 9500 rpm Speed

With a great power to weight ratio the 2100G makes it comfortable to get the job done. Delivering 550 ft-lb of maximum reverse torque and weighing only 4.3 lb, this tool has what it takes to handle the toughest jobs. This powerful, lightweight Ingersoll Rand composite air impact wrench delivers high torque through a sophisticated power management system.

Ingersoll Rand 2145QIMAX Air Impact Wrench, 3/4 in Drive, 1350 ft-lb, 7000 rpm Speed

The Ingersoll Rand 2155QiMAX 1 in Impactool? delivers incredible performance and industrial-grade durability in an impact wrench. Plus, its efficient air motor reduces air consumption to save you money. Ideal for the most demanding applications.

Ingersoll Rand 231C Air Impact Wrench, 1/2 in Drive, 600 ft-lb, 8000 rpm Speed

The heavy-duty 231C impact wrench has the reliability and durability you have come to expect from the Ingersoll Rand name. The powerful tool provides an even impact and is durable enough to last through the toughest work environments.

Ingersoll Rand 285B-6 Air Impact Wrench, 1 in Drive, 1475 ft-lb, 5250 rpm Speed

The 285B Series impact wrench is great for any garage. Fitted with an extended anvil, changing tires and deeper fastening will be a breeze.

Ingersoll Rand 301B Die Grinder, 21,000 rpm Speed, 24 cfm Air, 0.25 hp

Whether you need a right angle configuration or a straight, compact option, the 301B and 307B die grinders will not let you down. Durable, versatile and cost effective, these grinders are great for porting, weld grinding, smoothing edges, de-burring and polishing.

Ingersoll Rand Edge Series 114GQC Air Hammer, 3500 bpm BPM, 4 cfm Air

This standard-duty air hammer is handy whether you're cutting panels, fixing exhaust systems or making general repairs. Powered by compressed air, this tool delivers a 2-5/8 in stroke and 3500 bpm and is equipped with a quick-change retainer that makes it easy to swap chisels. Its rugged design sports an alloyed steel barrel and a heat-treated piston.

Ingersoll Rand Edge Series 236G Air Impact Wrench, 1/2 in Drive, 450 ft-lb, 8000 rpm Speed

You will find what you are looking for in the 236G 1/2 in Impactool?. With an impressive 1200 bpm and 450 ft-lb of maximum reverse torque, this tool is just what you need to get the job done. This tough Ingersoll Rand air impact wrench is great to have around the automobile shop. Its single hammer impact mechanism is durable and it boasts an easy to service two-piece construction.

Ingersoll Rand ThunderGun Series 232TGSL Air Impact Wrench, 1/2 in Drive, 625 ft-lb, 10,000 rpm Speed

As close as you can get to the real racing tools used by Nascar pit crews. It features 625 ft-lb of torque in reverse, with 10,000 rpm to deliver pit crew power, speed and durability for shop tasks.

Lifan ES2200SC Portable Generator, 17 A, 120 V, 2200 W Output, Gasoline, 1 gal Tank, 6 hr Run Time, Recoil Start

Lifan Power USA's energy storm ES2200 is part of our energy storm portable generator Line. The unit is EPA approved. This quality generator is a perfect fit for the emergencies, homeowners, jobsites, special events, parties or weddings.

Milwaukee 1660-6 Electric Drill, 7 A, 1/2 in Chuck, Keyed Chuck, 8 ft L Cord

This compact specialty drill packs big power. The 1/2 in compact drill has the power and versatility to handle high-torque drilling and material mixing applications. Built for two-handed operation, the drill features extra-long handles for added leverage and control. You'll get quiet performance from the heat-treated, helical-cut gears.

ProSource CC970 Air Blow Gun, 50 psi Air, 5-10 CFM Air

Ideal for cleaning damaging dirt and grime buildups from large machinery, engines and heavy equipment.

Surebonder 9600A Stapler, 1/4 to 9/16 in L Leg, Narrow Crown Staple, 100 Magazine

Safety Mechanism prevents accidental firing. Quick release magazine for easy loading. Adjustable air exhaust, stapler viewer. 100 staples capacity, 60 to 100 psi pressure rating. Dimension of 8.1 in L x 2.2 in W x 8.9 in H. Tool weighs 2.9 lb. Fastener drives 1/4 in thru 9/16 in Surebonder #4 heavy-duty staples (same as arrow T50), 1/4 in, 5/16 in, 3/8 in, 1/2 in and 9/16 in staple lengths. Includes high-impact carrying case.