This die-cast keeper or strike is used by many screen door manufacturers. It is 7/32 in wide with a 1/4 in deep projection. It has an downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch.

Extruded aluminum pulls, inside and out. Fixed anti-lift bar for added security. Reversible for right or left hand doors. Contains one inside pull and latch assembly, one outside pull, one face mounting keeper and installation fasteners.

This unique product is the most versatile locking unit available. It will accommodate 7 different hole spacing patterns from 3 to 6-7/8 in. The 3-15/16 in hole spacing is designed for use with mortise lock installations using Adam Rite and W and F mortise locks. These holes are offset 1/8 in from that of the locking cylinder hole. The spacing allows locking unit to adapt to a variety of handle sets.

Black die-cast supports w/wood handle. Mounting posts come finished in black colored paint and the wooden pull handle comes finished in a clear finish. Can be installed on doors with mounting hole centers ranging from 6-1/2 to 6-5/8 in center-2-center. Surface-mounted. Features a sturdy metal backer support behind the wood. Note: Color of wood may vary per shipment.

Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper and installation fasteners. For 1 in thick door rails.

Flush mount fits into door stile. 1/16 in projection inside/outside of patio door. Reversible for right or left hand application. Packed with 4 different latch hooks to fit virtually all applications. For 1 to 1-1/4 in thick doors. 6-1/2 in distance between attaching screws.

For 1 to 1-3/8 in aluminum doors. Internal latching, reversible for right or left hand application. Oak handle. 3-15/16 in installation hole spacing.

Wright Products flush mount patio door latch will work on both right or left hand door applications. Aluminum finish only.

Wright Products Door Handle, Locking, Reversible, Aluminum/Wood, Oak, Includes: Key Locking Unit

Wright replacement oak patio door handle can be installed on the interior plate of the V1195 or VK1195 flush-mounted latches to provide a larger pulling surface.

Internally latched, reversible for right or left hand openings. Secondary night lock feature prevents external latch operation for added security. Automatic unlatching option to prevent accidental lockouts. E-2054 stamped steel, sliding glass door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast. Includes inside wood pull and latch, outside pull, keeper and installation fasteners. For 1 in Thk door rails.

Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper and installation fasteners. For 1 in Thk door rails.

Non-handed, surface mount, economy pulls, plastic assembly. Contains one black inside pull, one black outside pull, #4 8 x 3/8 in Phillips flat head sheet metal screws. 1-7/8 in W x 4 in H.

Fits all popular flush lock punch outs for 1 in Thk doors. 3/4 x 2-3/4 in, universal design, die-cast, chrome finish keeper #E-2040 adjusts vertically. Includes 7-1/4 in L x 7/8 in W inside and outside pulls, latch on inside pull, keeper, installation fasteners and 4 assorted hooks (3/8 in, 3/4 in, 1/2 in and 5/8 in). 6-5/8 in installation hole spacing.

Standard reversible surface-mount for left or right-handed mortise-locking doors. Die-cast inside pull has wood handle, die-cast thumb turn and steel latch activator. Outside pull is die-cast.

Reversible surface mount for left or right handed mortise locking doors. Die-cast inside pull and thumb turn with hook style steel latch activator. Outside pull is die-cast and must use an E-2145 if key locking feature is desired. NOTE: Latch Lever is offset from center.

Hook style latch, designed to fit 90% of all internally latched doors, reversible right or left hand openings, complete with keeper, locking unit with key, automatic unlatching options prevents accidental lockout.

Extruded aluminum inside pull, clamp-latch with metal activator, die-cast outside pull has knock-out for converting to keyed cylinder lock, latch hook profile is 1/4 in, projection is 1/2 in, used by many patio door manufacturers.

Extruded aluminum inside pull with wood grain feature strip; clamp-latch with metal activator; flush extruded aluminum outside pull; used by many glass door manufacturers; latch hook profile is 1/2 in; projection is 1/2 in. Handle type - surface-mounted. Latch style - clamp style. Contents: 1 inside pull and latch assembly; 1 outside pull; installation fasteners.