Injection-molded plastic bottom guide fits up to 1/2 in thick door panels. Installed with double sided tape included. Used by several shower door manufacturers.

Threaded hex hub, die-cast zinc inner race, flat edge, plastic wheel with steel ball bearings.

Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, round edge.

Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, round edge.

Injection-molded plastic bottom guide fits 7/16 in thick door panels. Installed with double sided tape or snaps into extrusion fin. Used by several shower door manufacturers.

Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, flat edge.

Shower door bottom sweep with 3/4 in tee shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.

Gray vinyl, universal design, 1-1/2 in flat shape fits most older style drip rail systems. For use on hinged shower doors.

M 6014 is a swinging shower door catch that mounts onto the swinging door frame. The stainless steel housing contains a spring-loaded plastic latch and is adjustable. The mounting holes (slots) are 1 in apart.

Gray vinyl, star tip design inserts into receiver channel on door. The 1-5/16 in height fits many older style drip rail systems. For use on hinged shower doors.

White plastic bottom guide acts as a panel retainer. Used by Kinkead and Sterling.

Prime-Line Shower Door Bottom Seal, Vinyl, Clear, Dimensions: 37 in L x 3/32 in W x 1 in H

1 in T-shaped tip fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.

Prime-Line Shower Door Bottom Seal, Half-Round, Vinyl, Black, Dimensions: 36 in L x 5/32 in W x 13/16 in H

The 32 in chrome shower door towel bar set.