4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use.

Plastic and wax impregnated oak-tan leather cups for regular service. #3x2, use with #2 pitcher pump for 3 in cylinder. #31/2x21/4, use with #3 pitcher pump for 31/2 in cylinder.

Water pump pressure switches suitable for use on all types of pumps including jet, submersible and reciprocating. 2 Pole, NEMA Type 1 indoor enclosure, 1/4 in NPSF or internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant, NSF61-Annex G certified.

Water pump pressure switches suitable for use on all types of pumps including jet, submersible and reciprocating. 2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant, NSF61-Annex G certified. Individually boxed.

Designed for rugged, long-life service, all parts are made from close grain cast iron for optimum strength. All bolt lugs are reinforced for maximum strength. Cap can be adjusted for a wide range of handle positions. Base tapped for 1-1/4 in pipe connection. If handle is left in up position and no foot valve is listed, entire pump will drain-prevents freezing.

For #22368A pump. Complete with rod.

For use with 3-wire 4 in submersibles. Significantly reduces power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to install and service design. Voltage rating of 230 V. UL listed.

Heavy-duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4 in Dia. Boxed.

Built-in shallow well jet has corrosion-resistant nozzle, venturi and check valve. Close-grained cast iron pump body and base. Built-in check valve to prevent accidental loss of prime. Dustproof cover to protect all electrical components from dust and insects. Motor features stainless steel shaft, heavy-duty ball bearings, balanced rotor and insulated motor windings. Pre-set, pre-wired pressure switch for automatic operation when used with water system tank. Top or side discharge-simplifies installation. 1-1/4 in NPT suction and 3/4 in NPT discharge. Dual voltage 115/230 V, factory set at 230 V. Wiring diagrams are permanently affixed on each motor for easy field change to 115 V. Pressure switch setting 30 to 50. CSA certified.

Schneider Electric Square D brand of pressure switches have set the standard for reliability, efficiency and durability. As the most trusted brand in residential, commercial and industrial pumping applications, Square D pressure switches continue to meet the daily needs of the water systems industry.

This new revision of an old-hand provides good pressure pumping from wells where the depth to water is 25 ft or less.

This new revision of an old-hand provides good pressure pumping from wells where the depth to water is 25 ft or less.

Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individually boxed.

UL listed (Pump Accessory 344X). Significantly reduce power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to repair design. Open design permits easy wiring.

Heavy-duty cast iron, 5 bolt construction, 1/4 in grounding lug, 9/16 in screened vent, non-toxic lead-free paint, 1 in NPT conduit connection. Casing ID 6 and 6-1/4 in.

Compact pitless adapter. Bronze body. For submersible pump applications. Buna-N O-ring. Vertical position indicator. Fits 5 to 12 in well casing with 1 in drop pipe. Factory tested to 250 psi. Supports 5000 lb. Certified Water Tight by the Water Systems Council Pitless Adapter Division.

The EB-45 Series is a lead-free one 1/2 cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB-45 is assembled using modular construction methods and features end connections threaded for both FIP and union in 1 in through 2 in sizes. The EB-45 is intended for use where supply line pressure does not exceed 300 psi (400 psi 1/2 in, 3/4 in and 1 in). The EB-45 pressure regulators are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10 to 70 psi without changing the spring. This regulator is suited for either cold or hot (to 180 deg F) water service.

Simmons Cup, Leather, Dimensions: 3 x 2 in, Suitable for: Pitcher Pump

Waterproof impregnated lower valve for regular service.

Waterproof impregnated lower valve for regular service.

4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use.

Water pump pressure switches suitable for use on all types of pumps including jet, submersible and reciprocating. 2 Pole, NEMA Type 1 indoor enclosure, 1/4 in NPSF or internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant, NSF61-Annex G certified.

4 in single pipe deep well jet kit. Use with convertible jet pumps for 4 in deep well applications. For applications up to 110 ft depth to water.

Water pump and air compressor pressure switch with 20 to 40 psi cut-in/cut-out settings. Designed to control higher water pumps and air compressors requiring higher electrical ratings. 2-Pole, NEMA 1 enclosure, 1/4 in NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant, NSF61-Annex G certified. Individually boxed.

For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high-quality of rubber packet, drawing together the top and bottom castings by tightening of belts. Boxed.

For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high-quality of rubber packet, drawing together the top and bottom castings by tightening of belts. Boxed.

Designed for proper driving of well points. Has inside recess to prevent damage to pipe threads. Octagon-shaped for positive wrenching. Threads are standard pipe size, small vent hole in top of casting relieves pressure during driving operation.

Reduces OD to allow for greater waterway. Entire coupling galvanized.

Jet pumps are single-stage domestic water pumps designed for pumping potable water in applications where the water is up to 100 ft below pump center line. A pressure switch is a standard feature. A built-in control valve is available on deep well pumps. Deep well pumps can be mounted to either a pre-charged, conventional type or free- standing pressure tank.

Water pump pressure switches suitable for use on all types of pumps including jet, submersible and reciprocating. 2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant, NSF61-Annex G certified. Individually boxed.