Lock base of 15/16 in x 2-5/8 in, strike of 5/8 in x 2-5/8 in.

Extruded aluminum lock with steel thumbscrew for use on metal horizontal sliding windows. Finish by tightening thumbscrew with pliers to securely lock windows in closed or ventilating positions.

Extruded aluminum lock with no-mar vinyl insert to protect track of metal horizontal sliding windows. Finish by tightening thumbscrew with pliers to securely lock windows in closed or ventilating positions.

Used on vertical and horizontal sliding windows. Does not use keepers, latch engages fixed rail to lock. Includes 25/32 in W x 2-15/16 in L lock and 2 installation screws. 2-1/4 in hole centers.

Spring-loaded vinyl tilt latch, used on single or double-hung, aluminum or vinyl windows, for use on sash panels designed to tilt in and down from the top. Contains 1 left hand latch, 1 right hand latch, 1 set of installation screws.

die-cast construction fits aluminum, vinyl or wood double-hung windows. Universal cam-action lock design holds window securely closed. 2-1/4 in hole center to center.

Used on vertical and horizontal sliding windows. Does not use keepers, latch engages fixed rail to lock. Includes 25/32 in W x 2-15/16 in L lock and 2 installation screws. 2-1/4 in hole centers.

No nails required, chrome-plated, removal of sash not required for installation. Includes 2 springs.

Spring loaded vinyl tilt latch, used on single or double hung, aluminum windows. Unique wrap-around design attaches to top rail and stile. Fits on tilt-out window by Better Bilt. Contains 1 left hand latch, 1 right hand latch, 1 set of installation screws.

Fits aluminum, vinyl or wood double hung windows. Includes 25/32 in W lock, 5/16 in W keeper and set of installation screws. 2-1/4 in hole centers.

Cam-type sash lock with die-cast housing and steel keeper, designed for Daryl windows and other sliding windows. Includes lock, 3/4 in W x 1 in H keeper and set of installation screws. 1-1/2 in lock and 7/16 in keeper hole centers.

The H 3531 casement crank handle is aluminum die-cast and has a 5/16 in bore spindle. This fits any operator with a 5/16 in bore spindle such as the teardrop style casement operators (see H 3502 and H 3508). It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 2-11/16 in.

The H 3533 casement crank handle is bronze die-cast and has a 3/8 in bore spindle. This fits any operator with a 3/8 in bore spindle such as the square style casement operators (see H 3514 and H 3520). It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 2-11/16 in.

Spring-loaded vinyl tilt latch, used on single or double-hung, aluminum or vinyl windows. Use in sash panels designed to tilt in and down from top of window. Includes 1 left hand latch, 1 right hand latch and 1 set of screws.

Cam-action sash lock, universal design, stamped steel construction. Contains 1 sash lock, 1 keeper, 1 set of installation screws. 1-7/8 in Hole centers.

Cam-type action, with alignment lugs. used on vinyl framed windows. Contains 1 lock, 1 keeper, 1 set of installation screws.

The H 3539 is a non-handed casement locking handle in an aluminum finish with 2-3/8 in mounting holes. As a universal design, the handle is die-cast construction with the handle hanging straight down and used on many aluminum and steel windows. In addition, there is a 3/16 in security hole that locks the casement lock in place with the 1/8 in S 4071 security pin.

Spring loaded vinyl tilt latch, used on single or double hung, aluminum windows. Unique wrap-around design attaches to top rail and stile. Fits on tilt-out window by Better Bilt. Contains 1 left hand latch, 1 right hand latch, 1 set of installation screws.

The H 3553 is an older style of casement lock-plated brass on zinc die-cast and used on older style wood casement windows. The three different keepers allow for most mounting applications whether it be a swing in or swing out casement window. Installation screws are included. Besides being used on casement windows, it is often used on cupboards and cabinets for that retro look.

die-cast construction. Baked enamel finish. Used on aluminum or vinyl windows. Alignment lugs prevent shifting of rails during locking. Includes lock, keeper and installation screws.

Latch and keeper used on both residential and RV sliding windows. Contains 2 latches, 2 keepers with installation screws.

Deep offset latch. Fits Acorn and others. For single hung aluminum windows.

The H 3893 is a die-cast universal fit tee handle in satin bronze. It comes with 5 inserts that allow the Tee handle to fit the 5 most popular sized casement operator spindles. No guessing needed, fits every time. The adaptor fits over the existing operator spindle and is locked onto the spindle with the tee handleset screw.

Used on many double hung windows. Includes lock, keeper and set of installation screws. 5/8 in W lock and keeper bases. 1-15/16 in hole centers.

Spring-loaded, vinyl window tilt latch. Used on single or double hung vinyl windows. Fits a milled slot on window rail.

Spring-loaded. Used on single or double-hung, aluminum or vinyl windows, for use on sash panels designed to tilt in and down from the top. Content 1 left hand latch and 1 right hand latch.

The H 3514 casement window operator is a left hand aluminum square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 3/8 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart.

The H 3520 casement window operator is a right handed aluminum square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 3/8 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart.